For a long period, Samsung Diamond washing machines remain in demand, as they attract consumers with their stylish design, functionality and a sufficient number of various models. The devices that are representatives of this series meet all the necessary requirements. Therefore, even the most demanding customer will be able to choose the right unit.

Benefits of machines

The technique of the popular Samsung brand has long been tested for quality and reliability. In particular, Samsung Diamond washing machines are on the leaderboard. It is difficult to imagine everyday life without a washing machine, thanks to which it becomes much easier to keep things clean.

The Samsung Diamond line is units with different dimensions, functions, drum capacity and color scheme. A big plus of such machines is the presence of an A-class energy saving. How is the Diamond washing machine different from other Samsung models?

The instructions for the Samsung Diamond washing machine indicate the advantages of the device, which deserve special attention. The device has the following characteristics:

1. Drum with a unique design. It looks like a small honeycomb, which gives the impression that the inside of the machine is studded with diamonds. Therefore, the series was called Samsung Diamond. Thanks to the innovative solution, it is possible to wash things more efficiently, especially from delicate fabrics.
2. Intelligent Volt Control system, the task of which is to prevent damage to the washing machine due to power surges. If the power surge lasts less than a second, the device does not stop functioning. With a longer violation, standby mode is activated. As soon as the tension levels off, the washing process is restored.
3. Aqua stop system. It avoids leaks. Thus, the unit lasts longer without needing repairs.
4. A heater that is treated with a ceramic layer. The coating does not allow various deposits to settle on the heating element, so it does not fail for a long time.

Models with a load of 6 kg

Samsung is engaged in the production of a large number of washing units with different drum capacities. Among the Samsung Diamond with a 6 kg laundry load, the following models should be distinguished:

• WF8590NFW;
• WF8590NMW9;
• WF60F1R0F2W.

The WF8590NFW is a robust washing machine with an attractive design. Equipped with protection functions against power surges and possible leaks.

WF8590NFW 6 kg has a program for washing woolen items, thanks to which:

• it will be possible to avoid shrinkage of the fabric as much as possible;
• the form of things remains the same;
• fiber fluffing occurs, due to which the fabric wears out less.

Washing machine Samsung Diamond 6 kg has a hatch with a diameter of 330 mm, which greatly facilitates the loading of bulky items. Ease of use of the washing machine is ensured by a clear control panel. All options are marked so that any owner of the WF8590NFW can easily understand the principles of operation of the device, which must be supplemented with detailed instructions.

The difference with the WF8590NMW9 model, which can hold 6 kg of laundry, is that its drum can be loaded partially. This makes it possible to save on powder, water and electricity. In addition, the machine with a load of 6 kg has a Fuzzy Logic function. Its task is to set the desired temperature, determine the speed and number of rinses.

Washing machine for 6 kg WF60F1R0F2W is distinguished by the presence of:

• mini-programs;
• hand washing woolen things;
• washing mode for baby clothes;
• delayed start function.

Apparatuses containing 4 and 5 kg of laundry

Among the Samsung Diamond models with a maximum load of 4 kg, the following should be highlighted:

• WF3400N1V;
• WF0400N1N.

The budget option is the first washing machine, while in terms of functionality it is not inferior to more expensive units. The WF3400N1V, which holds 4 kg of items in the drum, is easily built into kitchen or bathroom furniture.

The instructions indicate that the washing machine has only 8 programs, but they are quite enough to carry out a full wash. The device allows:

• choose the temperature and spin speed;
• control foaming.

Reviews indicate that the use of the WF3400N1V is appropriate in cases where you want to wash small items. The depth of the drum is only 34 cm. However, the machine does an excellent job with its tasks, while there is no loud noise and vibration at high speeds.

The WF0400N1N unit is simple and compact. Since the drum can be loaded with a maximum of 4 kg, it is suitable for single people or a family of 2-3 people. During one cycle, the machine with a load of 4 kg consumes 43 liters of water. The difference from the previous model is the presence of 11 programs.

One of the representatives of Samsung Diamond units, into which 5 kg of laundry can be loaded, is the WF8500NHW. The frontal machine has 8 programs, among which there is an express wash option. Thanks to the delayed start function, the wash can be scheduled at the right time.

A feature of the model with a capacity of 5 kg is the ability to open the hatch for a 5-minute period after turning on the start in order to load or remove a thing. Also in the machine with a load of 5 kg, child protection is provided. A useful feature is troubleshooting. The device will let you know in time about the occurrence of a malfunction.

The most common breakdowns and how to fix them

Samsung Diamond is considered a very reliable technique, but it can also break down. Before using the installed unit, you should carefully study the instructions in order to understand what are the errors of the Samsung Diamond washing machine.

In the event of a breakdown, the manufacturer provides an indication. When error codes light up on the display, you can determine what happened from them. Instructions for use Samsung Diamond contains a list of all codes and their decoding, so if necessary, it will be possible to easily calculate the malfunction.

There are a fairly large number of errors that can occur during the operation of the machine. Among them are those that occur most often:

1. Code DE means that the sunroof was not fully closed. If after re-closing the display continues to display an error, it may be necessary to repair the door hinge or the microcontroller. Troubleshooting should be carried out by a specialist.
2. Error E4. Lights up when too much laundry has been loaded. The second option is if it is unevenly distributed in the drum. Errors are easily fixed. The only thing is, when the hatch is already blocked, it is necessary to disconnect the device from the network, which will make it possible to correct the violation.
3. Error codes 5E, SE and E2 indicate problems with draining water. To eliminate errors, it may be necessary to repair the electronic module, pump impeller or water level sensor. It also does not rule out clogging of the drain.
4. H1 signals a breakdown of the heating element. To understand how to remove the heating element and replace it with a new one, you should study the instructions. However, it is better to entrust the repair to the master.
5. 4E - indicates that the washing mode is set incorrectly. If you adjust the temperature, the error will disappear.

This is not a complete list of breakdowns that occur during the use of Diamond series machines. You can familiarize yourself with the entire list of malfunctions by reading the instructions, as well as watching the video presented. The main thing is not to forget that before you remove the failed element, be sure to disconnect the device from the mains.

Samsung Diamond technology has proven its reliability, as evidenced by numerous reviews from grateful consumers. If you use the device correctly, it will last a long time, practically without failing.

_____________________________________________________________________________

Recommendations for the operation and settings of Samsung Diamond washing machines

There was a breakdown this morning. Washing machine WF8590NLW8DYLP cannot open. Probably the door is locked. For what reason could this happen?

Apparently, there is a breakdown of the UBL.

Who can tell why there is no rotation of the drum? SMA has been in operation for only 7 months.

The main factor in this malfunction is wear on the drive belt or motor brushes.

The WF8590NMW9 machine is connected. The malfunction is contained in the fact that the unit began to shake very strongly. How can I fix this?

In the event that no flaws were made at the time of installation of the device, therefore, shock absorbers or shock absorber springs should be considered a malfunction.

Recently, in the Samsung Diamond WF8590NLW9 machine, the execution time for each stage began to increase, so in general the wash lasts longer, however, without loss of quality. It just erases any program for about half an hour longer, and at the same time does not show anything on the control panel about failures or malfunctions in the equipment.

It looks like the timer is faulty.

The WF 8590NMW9 automatic machine was bought about five years ago, almost new. During all this time, it has always worked properly, never gave out a single failure. Now the unit does not finish the wash as expected, on the spin cycle, approximately in the middle of the cycle, it stops with indications of equipment malfunction. On the control panel, the fault indication LEDs are displayed, the equipment goes into standby mode. SMA can be restarted only after an hour, not earlier. What is the problem?

Perhaps a malfunction of the engine, in particular its windings. You can also check the tachogenerator.

At the Samsung Diamond WF8590NMW8 machine, the drum has not recently been working on any wash, including with a separately set clothes spin. The device, after starting, draws water into the tank, then heats it up to the set temperature, after which it turns off the program, shows an error and goes into standby mode. The operation of the electric motor is not audible. It is completely impossible to use the device. Help, how to fix the damage?

There may be a problem with the motor, it needs to be diagnosed.

After the last wash, the hatch did not open on the WF8590NLW8DYLP machine, which caused a forced intervention to remove the washed clothes. At present, the machine does not start after programming because the door latch does not work. Programs can be selected, but after the start, the unit after a while shows an error on the panel, and turns off. What could be the problem?

You need to check the UBL node. The most likely cause of the problem is the jamming of the latch of the automatic door lock.

At the main stage of washing, the Samsung Diamond WF 8590NMW9 works well, but it starts to slow down during the rinse, the drum sometimes cannot start working for several minutes. Then the water is drained, and already on the spin cycle the drum does not start at all. The equipment must be turned off, then wait for a while, usually more than an hour, in order to run a separate program to spin the already washed clothes. All the time of the failure, the failure of devices is displayed, but at a new start, there is no indication on the control panel. What kind of breakdown is this?

Very similar to a problem in the electric motor, apparently, he has already exhausted his life due to constant intensive use without preventive maintenance. You need to check the motor.

For several days in a row, the CMA WF8590NLW9 has been knocking hard and vibrating during the spin cycle. The program is carried out to completion, there are no failures. It is inconvenient to use the equipment, with this malfunction in the operation of the equipment, the quality of washing is not disturbed, but the device moves along the floor covering with the risk of disrupting the connection to engineering networks.

The problem is the functionality of the electric motor, but the main reason is the strong wear of the bearing assembly. Bearings need to be replaced.

The Samsung Diamond WF8590NMW8 washing machine does not spin the washed clothes when performing any washing program, so the user has to wring out the clothes manually. After a rinse cycle is completed, it drains the water and stops, going into standby mode. Several LEDs are lit on the display panel to indicate a technical error. The device will then automatically turn off. Restarting the program does nothing. What could be the problem?

It is necessary to check the condition of the drain system, as well as filters and valves for blockages. The bilge pump may be faulty.

When draining the water on the spin cycle, the WF8590NLW8DYLP equipment is unstable, stops periodically, and always displays a malfunction of the electronics. After a few minutes of idle time, the machine resumes operation again, the display goes out, and spinning continues. It makes no sense to restart the technique, the situation does not change. However, when it finishes spinning, it stops the program and there are no comments on the quality of the laundry at the output. What's wrong?

Perhaps these are problems with the electronics, but there may also be a defect in the operation of the drain pump.

In operation CMA WF8590NMW9 with a load of 6 kg. The problem is this, the car did not start the engine, after checking everything that is done in this case, I set about inspecting the module, found a broken ULH 2003, a visible breakdown opposite the 11th leg and between 11 and 9 kz, changed the microcircuit, to no avail. Then I discovered that there was no power to the engine relay, and the microcircuit was broken again between 11 and 9. I checked on the new one between 11 and 9 there is resistance, the relay is working properly.

Maybe 10 Ohm, maybe 10 mOhm - where are the numbers? If the ULH is faulty, look for a short in its circuit.

Malfunction of the washing machine automatic Samsung Diamond WF8590NMW8 (loading 5 kg). Constantly pours water, what to do, where to start? The program turns on normally, closes the door, draws water, into the first chamber, then the second chamber, the drum rotates. On the pause button, does not respond, continues to draw water until you disconnect from the network.

Either change the module, or contact the master, but for starters, checking the valves is still not superfluous.

In the WF8590NLW9 washing machine, the tank cannot fill with water when pumping. After one minute of operation, the drain is turned on, although the tank is not yet filled to capacity. An error message appears on the control display. The equipment broke down for the first time, although it had been in operation for a long time.

Looks like the control module has failed.

Samsung Diamond WF8590NMW9 washing machine installed. When you turn on any washing mode, it shows a DE error. Threw another module - everything works. Tell me what to solder on the module?

Remove the module, look, sometimes you can see it. Check UBL.

In the WF8590NMW8 model, during the spin cycle, a sufficient drum rotation speed does not develop for high-quality spinning. SMA constantly works on the spin cycle at a speed of no more than 500 rpm. What qualitatively affects the results. Even if you specifically set 1000 revolutions, it will still work poorly, not giving a high drum speed. You have to either wring out the laundry manually, or run an additional spin, which brings inconvenience. Tell me, what's the problem?

This problem is most likely in the tachogenerator. Either repair or replace.

The Samsung Diamond WF8590NLW8DYLP machine does not take all the powder from the loading tray while pouring water into the tank, almost half of the normalized portion remains in the tray. At the same time, the equipment does not identify a malfunction, does not show an error on the control panel. Washing has deteriorated, the quality of the laundry at the output does not meet the requirements. How can this be fixed?

Looks like a clogged filter mesh in the bay. It is necessary to remove the blockage and clean the nozzle and tray.

CMA Samsung Diamond WF8590NLW9. Everything seems to be nothing so far, you can close your eyes to something, but as I read about another model, it takes very little water when washing and rinsing. If you load up to 2 kg. linen, then even less, if more than 4, then it simply twists wet linen and that's it, when rinsing it is the same. Tell me what can be done or how to deceive her, can I change my brain or, in general, I don’t know? Any sensible advice will be glad. Adding water to the powder compartment is already tired.

Large loads are only possible on the cotton program. For all others, no more than 1.5-3 kg, usually as described in the instructions. Entry-level washing machine, it is impossible to wait much. Reflash brains? Well, it's unlikely. Try to put already pre-soaked laundry. Maybe this will help.

Faulty washing machine WF8590NMW9 with a load of 6 kg. Does not turn on. Washing completed normally with the performance of all functions, signaled the end. The linen was not taken out for about an hour. After an hour (approximately) the laundry was taken out, the door of the loading hatch was left for airing. The washing machine was not disconnected from the mains. The next day, laundry was loaded into the drum, the door was closed. We pressed the "Enable" button, that is, everything is as usual, no reaction: there is no indication and silence. Power at the output of the network filter (interference suppressor) 220 variable available. Electronic unit DC92-00523A/110818/ALF0185, visually (removed, disassembled) in perfect condition (no signs of moisture, burning, swelling and swelling, and visually without anything that could indicate a malfunction. The "Start" button rang - works flawlessly). The hatch blocking device was visually as new, it was removed and when 220 was applied to pins 3 and 5 it worked to block. Both faucets / water injection relays, with the connectors removed, were tested for operability by supplying AC 220 directly from the mains - operable. What would you recommend to check yourself?

Check the power supply capacitors, PWM controller, transformer.

We are repairing the WF8590NMW8 washing machine (loading 5 kg). A DE error appears on the display, even though 220 is applied to the lock itself (checked). The most interesting thing is that I decided to test the lock on another SMA, and it worked. Has anyone encountered such a breakdown? I know that you can climb in the module, but the feed still goes to the lock.

If power is supplied to the lock, then it must be closed and, most likely, power comes from it to the module, if everything is in order with the wiring. Therefore, look for the cause in the module.

After the CMA water intake, the Samsung Diamant WF8590NLW8DYLP immediately turns on the bilge pump, and the water is removed from the tank along with the detergent. Then she stops and waits. All attempts to restart the equipment end up the same. Washing is not possible. Help solve the problem.

Probably a malfunction of the water level sensor in the tank. It needs to be replaced.

In operation, the WF 8590 NMW9 washing machine with a load of 6 kg. The reason is this: when washing and spinning, it twists only in one direction. The belt is pulled.

Check the motor control circuits (from the motor connector to the processor).

The WF8590NMW8 washing machine had a problem after it had not been used for almost half a year, it was in a dry storage room. After connecting it to the water supply system, the water drain system and the electrical network, it does not turn on, while only the “Start” indicator lights up, no errors are displayed. For some reason, for some time after pressing "Start", the water drain pump starts. What could it be?

There is probably a malfunction of the pressure switch, in which the air outlet tube may be clogged with salts deposited over time.

Description: Samsung WF8590NMW8 washing machine

Washing machine SAMSUNG WF8590NMW8 good model, nothing more. In this model, a relatively small number of pre-installed programs, there are no useless ones. The control of the washing machine is simple, even a child will figure it out, for manual modes the settings are very flexible, and will suit even the most demanding and perfectionists.

Samsung WF8590NMW8 roomy enough. For one wash, you can wash up to 6 kilograms of laundry. Spin speed up to 1000 rpm. Works quietly, consumes little energy. Some buyers had difficulties with the installation of this model, namely the regulation of the legs.

Samsung WF8590NMW8 It has a lot of advantages, with only a few not serious disadvantages.

Washing machine SAMSUNG WF 8590 NMW8. Advantages and disadvantages

Advantages:

• golden mean: price / quality;
• high build quality;
• service and warranty for the washing machine;
• quality laundry;
• simple installation that does not require special skills;
• excellent design and appearance;
• simple and intuitive control;
• very capacious drum for 6 kilograms;
• very quiet during washing;
• a large number of useful washing modes;
• stable, does not "jump" during the spin cycle;
• there is a countdown timer on board;
• wrings well, at a speed of 400 to 1000 rpm;
• relatively small weight of the washing machine, only 59 kilograms;
• automatic drum balancing (function);
• ceramic heater and water heater;
• child protection.

disadvantages:

• short hose for draining water;
• no delicate wash mode;
• no significant deficiencies were found.

Instruction for several models

Please note that the instructions also apply to the following models:

• WF8694AH**
• WF8692AH**
• WF8690AH**
• WF8698AH**
• WF8592AH**
• WF8590AH**
• WF8598AH**
• WF8694AM**
• WF8692AM**
• WF8690AM**
• WF8698AM**
• WF8592AM**
• WF8590AM**
• WF8598AM**
• WF8694NH**
• WF8692NH**
• WF8690NH**
• WF8698NH**
• WF8592NH**
• WF8590NH**
• WF8598NH**
• WF8694NM**
• WF8692NM**
• WF8690NM**
• WF8698NM**
• WF8592NM**
• WF8590NM**
• WF8598NM**

Washing machine SAMSUNG instruction. How to download instructions?

It is easy to download the instruction, at the beginning of the page you have a table of the following form.

EcoBubble™ Bubble Generator

EcoBubble technology makes sure your clothes look like new. Before washing begins, a special generator creates air bubbles by dissolving the detergent in water and turning it into foam. The ideal snow-white foam quickly penetrates the fabric, providing not only effective, but also gentle removal of dirt. EcoBubble technology also significantly reduces the mechanical impact of laundry detergent on the fabric, which will keep your favorite things looking their best.

Clean detergent tray

Always clean tray

Thanks to the special design of the tray and the special algorithm for supplying water to the tray, the detergent is washed out completely, without residue. Thus, the consumption of detergents is as efficient as possible and the tray remains hygienically clean.

Caring for delicate laundry

The modern shape of the Diamond Drum ensures gentle yet effective washing of clothes. The drum with pyramidal recesses of the walls takes care of your laundry during washing, and the small holes in the tops of the pyramidal recesses do not allow the fabric to get stuck in the holes. The result is efficient and fast washing.

Save time

The Quick Wash program is the perfect solution for your busy lifestyle. Use this program to wash a small amount of lightly soiled clothes.

Surge Protection

Volt control function

The Volt Control function protects the machine from power surges. It detects a significant increase in supply voltage and automatically turns off the machine. This prevents damage to the washing machine.

2 years ago

I did not find it, an ordinary washing machine.

2 years ago

And it's good that it works at 70%!

2 years ago

Inexpensive roomy, quiet! Big loading hatch!

2 years ago

1.Democratic price 2.Washes everything. 3. Someone wrote about a bad rinse - nonsense, you can install several rinses (up to 3, it seems) and you don’t have to pour half a pack into the wash. A colleague at work complains about the smell of powder from his things, this machine does not have this, you even have to pour a little more air conditioner if you want alpine meadows. I adequately washed the down jacket, and gently squeezed it out at low speeds - it became like new!

2 years ago

Convenient and clear control - washes well - free 3-year service

2 years ago

Firstly, the cost, in the region of $ 330 (bought in February 2014), has a small number of programs, and for less dirty laundry, the mode is 29 minutes.

2 years ago

None!!!

2 years ago

2 years ago

Roomy, stable. I will not appreciate the water savings, because. no counters. But electricity eats less than the previous one.

2 years ago

Price Not very noisy

2 years ago

She worked for 2.5 years, the heating element burned out. When viewed through the top cover, it was revealed that the cuff was also torn. The warranty has already expired, the advertising slogan about a ceramic heater that lasts three times longer is a complete lie!!!

2 years ago

The water is drained every other time, at first I thought that due to the fact that the hose was connected to the drain, I threw everything into the bathroom the same 5-7 washes, normally one remains with water, you have to turn on the rinse with the spin cycle! I called those support and they say that, for example, bed linen should be washed as follows: in the middle of washing, stop the machine, after a while the door lock will open and just straighten all the linen on the drum!

2 years ago

1.Sometimes the sock is clogged under the rubber band of the door.
2. For the first couple of washes, the elastic of the door "smells", but this smell was not transmitted to the linen.

2 years ago

Fast dying ten

2 years ago

I didn’t notice any shortcomings. Only if I had to lengthen the hoses for water and drain. But this is not a problem now, everything is available in the store. It all depends on the place of installation.

2 years ago

At the beginning of the wash, it takes up little water, spinning almost dry for about 20 minutes !!! Rinsing badly. There is no auto detection of water. At least 2 kg, at least 5 - it gains water in the same way !!! There is no intermediate temperature of 80. The drain hose is short, I had to buy more !!! 6 kg publicity stunt!

2 years ago

2 years ago

Small items, such as children's socks, get stuck between the door and the rubber band of the tank, and have to be washed by hand.
The declared 6 kg is just a convention.
The child lock is a complete sham, it blocks all buttons except for the very power button.
There is no economy wash or half tank loading.

2 years ago

It rinses terribly, dark linen is all stained with powder.
Presses badly.
Rip linen.
The rubber bands are terrible.
There is no way to manually adjust the time and mode of washing for yourself.

2 years ago

Small things really are very often clogged between the rubber band and glass. You can solve the problem by collecting little things in a bag for delicate washing, but we do not bother.
Wide hatch - small laundry sometimes spills out, you have to hold it while you fill it.