The bottle holder not only performs all its functions, but is also a great addition to the interior. A kitchen bottle rack, or, as kitchen fittings manufacturers call it, cargo, is a system made of rods for storing bottles and tall dishes, protecting them from falling and damage. Bottles have upper and lower sections, less often - three sections. Cargo is built into a special retractable module to which they are attached using telescopic rails. The front side of the bottle is decorated with a facade. Such accessories allow you to effectively use small spaces in the kitchen, and also reliably protect bottles from falling.
It is convenient to use a cargo bottle holder not only for bottles, but, for example, for storing containers with cereals or packages with household chemicals.
The bottle can be used to store various herbs and spices
Wine bottles must be stored in a horizontal position or with the neck slightly tilted down to prevent the noble drink from oxidizing. Therefore, a cargo bottle is not suitable for storing wine.
Some manufacturers provide bottle holders with towel rails and rings to prevent bottles from touching, making this accessory even more convenient.
Bottle holder "Sapphire" in the interior of the kitchen (video)
Standard bottles: what you need to know about them
Kitchen bottle holders are usually used when a set of basic working modules leaves a small space in which even a narrow cabinet cannot fit, but which you want to use effectively. Such "voids" are effectively filled by the bottle holder. Hence the widely varying sizes, so that the accessory can fit into the kitchen set in almost any situation.
Most optimal size products - 150-200 mm
Manufacturers classify bottles according to the width of the module in which they are built. The standard size range includes sizes from 150 to 450 mm in increments of 50 mm.
The next difference between the kitchen bottle holders is the way they are attached to the module. There are bottle holders with side and bottom mounts. Accordingly, side fastening means that the fittings are fixed on the inside of the side part of the box, and the bottom fastening means that the fittings are fastened to the lower horizon of the box. In both cases, the bottle holder can be retractable, but in the second case, it leaves on wheels.
When choosing a bottom-mounted bottler, the floor must be perfectly flat so that the system rolls freely on it.
A handmade bottle holder should fit into the overall style of the interior.
Almost any needlework will be appropriate in a rustic, country, Provence style kitchen. The bottle-lattice made of glazing bead will fit into the interior and in the kitchen in classical style or eclectic.
Cargo are characteristic of the French Provence style
For a high-tech kitchen, only very specific needlework is possible. For example, you do wonderful hardware or collect them from different metal parts. The latter, by the way, is now fashionable men's needlework. So if you have imagination and a sense of style, as well as special skills, you can make a bottle holder with your own hands for any kitchen.
Alcohol storage bottle
A bottle of vodka or liquor can also be stored in the cargo bottle holder described above. But for storing elite alcohol and especially wine, you can come up with something more interesting, so that the bottle holder also becomes decorative element interior. Especially if you have a kitchen-dining room, large areas and you often arrange feasts.
Forged bottle holders are quite difficult to do on your own: it is better to entrust this work to professionals
Artistic forging workshops offer forged bottle holders. They are very beautiful, but not suitable for every style of decoration, and as a rule, their acquisition assumes that you have some other forged decorative elements. But if you have Vacation home with a fireplace, then, of course, a forged bottle holder in such a kitchen-dining room is just right.
When choosing a bottle holder for storing expensive alcohol, be sure to keep in mind that alcohol does not like bright light and temperature changes. Manufacturers of expensive drinks usually inform consumers about exactly how a bottle should be stored.
There are special shelves that allow you to store bottles in a horizontal or inclined position. And some craftsmen make such shelves with their own hands, giving, moreover, to them unusual shapes, for example, a half of a guitar or a steering wheel, or something else like that.
How to install a bottle holder in the kitchen (video)
A bottle holder is a useful accessory that makes efficient use of small spaces, providing convenient storage for bottles of inexpensive alcohol or vinegar and vegetable oil, or sauces or containers of household chemicals. Bottle racks can be built into the top or bottom tiers kitchen set. To store expensive alcohol, it is better to have separate bottles, which will be both a storage and a decorative element of the interior and will allow you to comply with right conditions drink storage.
How to choose a convenient and reliable bottle holder for the kitchen, an overview of prices, photos of popular models of pull-out cargo baskets and pro tips - here.
Bottle holder (cargo)- a retractable wire basket that is built into the upper or lower cabinets of the kitchen set. It is pulled out thanks to telescopic guides, and its front side is closed by a furniture facade.
Quick article navigation:
Cargo example for upper cabinets Why is she needed?
- The bottle holders fit perfectly into the narrow niches of the kitchen set, which often remain when creating a kitchen from modules. standard sizes. If you don’t want to pay extra for non-standard cabinet sizes or waste precious space behind a standard false panel, put a cargo - it will be much more convenient to use the kitchen.
- Narrow pull-out baskets are great for storing bottles of oil, vinegar and sauces, tall containers of cereals, jars of spices, boxes and more. Getting oil or spices out of such a basket is much more convenient than trying to find what you need on the shelves of a narrow cabinet. In addition, the standard height of the ceiling in an ordinary closet simply will not allow you to put a bottle there. In hardware stores, you can also buy cargo options with special holders for towels or baking sheets. If you love to cook, you will always have everything you need at hand.
- If your kitchen has washing machine, use the drawer to store laundry detergent.
The ideal place for narrow drawers is on the sides of the stove or hob.
Flaws
Kitchen fittings have one common drawback - the price. Any retractable and withdrawable elements will make your kitchen more expensive. But this is just the case when it is better to save on facades and decoration than on your convenience.
What is the price
The cheapest Chinese-made bottles in Moscow online stores of kitchen fittings cost from 2,000 rubles. As a rule, this simple models without closers with partial extension.
Cargo for the kitchen, made in Poland (Rejs) or Italy (Vibo), you can buy, respectively, from 3 and 5 thousand rubles.
Narrow retractable systems of well-known brands from Germany or Austria (popular manufacturers - Blum, Hettich, Kessebohmer) are sold at a price of 10 thousand rubles. But you can find relatively inexpensive German-made models (Vault-Sagel), prices for which start at 6 thousand rubles.
The price of pull-out baskets depends on the width of the facade, the number of shelves, the availability of additional fittings.
Is it worth paying for a brand?
In more expensive cargo models, the payment goes not only for a big name, but also for a verified design, impeccable performance and long service life. Good fittings will serve you for 15 years, or even more.
When buying cheap accessories, surprises are possible. For example, one of my friends decided to save money and faced the fact that bottles in a cheap basket fall every time they are opened.
When ordering a kitchen in a showroom, keep in mind that the furniture manufacturer may make its own markup on fittings, and it may cost more than in online stores or building hypermarkets.
Step 1. Choose the size of the bottle
Perhaps the main criterion for choosing such accessories is its width. If you see in the description of the basket the size of 100 or 200 mm, then you need to build such a bottle holder into a kitchen cabinet with a facade of this width. The hardware itself will be a little narrower.
The most popular options are bottles with a width of 150, 200 and 250 mm. Narrower cargo will not fit large bottles of oil. Wider (up to 400 mm) are designed to store dishes and food.
Step 2. How many shelves do you need?
Usually narrow drawer baskets have two shelves: on the bottom you can store tall bottles and containers, the top one is for short bottles and cans. Three-tier bottle holders are very handy if you need to keep a lot of small jars and containers (like spices) on hand, or if you plan to store canned food jars and other supplies in them.
In some cases, it is worth buying a single-tier basket. The place of the top shelf in such models is occupied by a towel holder or one or two small drawers hidden behind the same facade.
Good fittings allow you to adjust the height of the shelves, so you can easily adapt the cargo options to your needs.
Step 3. Choose a mounting method
Hardware manufacturers offer two cargo options - with side or bottom mount.
The first option is the most popular, it is in this way that narrow bottles up to 20-25 cm wide are fixed in the cabinet. Experienced kitchen assemblers find it more convenient for adjusting the facade, and the fittings “sit” more securely in the cabinet.
The bottom mount is good because it is suitable for wider and heavier baskets, and allows you to place them anywhere in the kitchen set.
In the photo: on the left is an example of a bottle holder with a side mount, on the right - with a bottom Step 4. Angle of fastening of the facade
Narrow end floor cabinets kitchen set can also be made more spacious and comfortable. For them, they sell special retractable baskets with a front part located at an angle of 45 degrees.
If you need just such a model, be careful when buying: such systems have only one mounting option - right or left. Therefore, decide in advance which side you will approach the locker and get its contents.
In beveled sections, rotary bottles are sometimes used. When opening the facade, such fittings completely leave the headset to meet you, and you can easily get any item. However, such baskets are much more expensive - 18-20 thousand rubles for German-made models.
Step 5. Additional Options for Convenience
- The most convenient are full extension bottle holders. They are more expensive than budget models, but will provide you with a very comfortable overview and easy access to your content.
- When choosing accessories, make sure that the basket is equipped with closers. Thanks to them, the retractable system will close softly, smoothly and silently.
- To make the bottles stand more stable and not touch each other, purchase special metal half-ring separators.
- When choosing a model, pay attention to the load for which it is designed. Narrow baskets, as a rule, can withstand up to 12 kg. Wider drawer systems can accommodate significantly more weight.
- More expensive fittings differ from cheap ones not only in design, but also in the quality of the shiny coating on the metal. The best option if chrome plating is done by electroplating. Such a coating lasts much longer, and on its surface there will be no rust, scratches, chips and scuffs.
- Even if you decide to order a kitchen set with frame facades, it is still better to hide the sliding sections behind smooth panels if possible. Mounting fittings on flat facades is easier.
- Fastening the basket to the facade is not always included. Sometimes you have to buy them extra.
- Most of the baskets in the assortment of Moscow online stores are presented in chrome color. But if you ordered a classic style kitchen set with bronze fittings, try to find bottle holders in the same style. They look great with dark solid wood or MDF kitchens with oak, walnut or wenge veneer.
A kitchen bottle rack, or, as kitchen fittings manufacturers call it, cargo, is a system made of rods for storing bottles and tall dishes, protecting them from falling and damage. Bottles have upper and lower sections, less often - three sections. Cargo is built into a special retractable module to which they are attached using telescopic rails. The front side of the bottle is decorated with a facade. Such accessories allow you to effectively use small spaces in the kitchen, and also reliably protect bottles from falling.
It is convenient to use a cargo bottle holder not only for bottles, but, for example, for storing containers with cereals or packages with household chemicals.
Wine bottles must be stored in a horizontal position or with the neck slightly tilted down to prevent the noble drink from oxidizing. Therefore, a cargo bottle is not suitable for storing wine.
Some manufacturers provide bottle holders with towel rails and rings to prevent bottles from touching, making this accessory even more convenient.
Bottle holder "Sapphire" in the interior of the kitchen (video)
Standard bottles: what you need to know about them
Kitchen bottle holders are usually used when a set of basic working modules leaves a small space in which even a narrow cabinet cannot fit, but which you want to use effectively. Such "voids" are effectively filled by the bottle holder. Hence the widely varying sizes, so that the accessory can fit into the kitchen set in almost any situation.
Manufacturers classify bottles according to the width of the module in which they are built. The standard size range includes sizes from 150 to 450 mm in increments of 50 mm.
The next difference between the kitchen bottle holders is the way they are attached to the module. There are bottle holders with side and bottom mounts. Accordingly, side fastening means that the fittings are fixed on the inside of the side part of the box, and the bottom fastening means that the fittings are fastened to the lower horizon of the box. In both cases, the bottle holder can be retractable, but in the second case, it leaves on wheels.
When choosing a bottom-mounted bottler, the floor must be perfectly flat so that the system rolls freely on it.
Furniture assemblers give conflicting advice on which mount is more reliable and functional. Therefore, the most correct option is to choose what is convenient for you and purchase both the bottle holder and the headset itself from a trusted manufacturer who is guaranteed to make high-quality furniture, for example, IKEA, then there should be no problems with fastening.
It often happens that during the formation of the headset, the “gap” remains in both the lower and upper tiers. In this case, two bottles are mounted, one under the other. It is convenient to store bottles of alcohol in the bottle holder located in the upper tier, and use the lower one to store something cheaper and what should always be at hand.
Do-it-yourself bottle holder for the kitchen
Many housewives are fond of needlework. This is both recreation and creativity. As a result, pleasant and useful things are obtained that decorate the interior, add individuality to it and create home comfort. From the simplest materials at hand, you can make, for example, a convenient and beautiful bottle holder for the kitchen.
Such material can serve as a glazing bead, ropes, wooden slats, drywall. The bottle can be woven using the macrame technique.
And you can specially buy blanks, for example, ready-made plywood bottles and paint it yourself or decorate it using decoupage technique.
A handmade bottle holder should fit into the overall style of the interior.
Almost any needlework will be appropriate in a rustic, country, Provence style kitchen. The glazing bead bottle holder will fit into the interior and in the kitchen in a classic or eclectic style.
For a high-tech kitchen, only very specific needlework is possible. For example, you make wonderful metal products or assemble them from different metal parts. The latter, by the way, is now fashionable men's needlework. So if you have imagination and a sense of style, as well as special skills, you can make a bottle holder with your own hands for any kitchen.
Alcohol storage bottle
A bottle of vodka or liquor can also be stored in the cargo bottle holder described above. But for storing elite alcohol and especially wine, you can come up with something more interesting, so that the bottle holder also becomes a decorative element of the interior. Especially if you have a kitchen-dining room, large areas and you often arrange feasts.
Artistic forging workshops offer forged bottle holders. They are very beautiful, but not suitable for every style of decoration, and as a rule, their acquisition assumes that you have some other forged decorative elements. But if you have a country house with a fireplace, then, of course, a forged bottle holder in such a kitchen-dining room is just right.
When choosing a bottle holder for storing expensive alcohol, be sure to keep in mind that alcohol does not like bright light and temperature changes. Manufacturers of expensive drinks usually inform consumers about exactly how a bottle should be stored.
There are special shelves that allow you to store bottles in a horizontal or inclined position. And some craftsmen make such shelves with their own hands, giving them unusual shapes, for example, half a guitar or a steering wheel, or something else like that.
How to install a bottle holder in the kitchen (video)
A bottle holder is a useful accessory that makes efficient use of small spaces, providing convenient storage for bottles of inexpensive alcohol or vinegar and vegetable oil, or sauces or containers of household chemicals. Bottle holders can be built into the upper or lower tiers of the kitchen set. To store expensive alcohol, it is better to have separate bottles, which will be both a storage and a decorative element of the interior and will allow you to observe the correct storage conditions for the drink.
Your repost will change the Internet :)
IN modern kitchen You can not do without such an accessory as a bottle holder. Its other name is cargo. This is a pull-out basket made of metal rods, from where it is convenient to get spices, oils, drinks or kitchen utensils. In essence, each hostess or owner uses cargo at their own discretion, and not necessarily for storing bottles.
Purpose and location
In the kitchen, where they cook with feeling, sense and taste, the cook must have at hand: table vinegar, vegetable oils, sauces, liquid seasonings, etc. A pull-out bottle holder is the best way to access these products. As a rule, its place is next to the hob.
The same applies to cargo, where pans, baking sheets and other attributes of the culinary action are kept.
Not far from the worktops, metal baskets are placed where canned food, homemade preparations, and drinking water are stored.
It happens that in cargo it is most convenient to keep cleaning and detergents. In this case, it is installed next to the sink or washing machine.
And the bottle holder, which fully corresponds to its name and serves as a bar, is logically placed closer to the dining area.
Cargo of any purpose can be mounted inside the upper (hinged) or lower cabinets. It depends on the height and preferences of the owners, as well as on the configuration and content of the headset.
If the area allows, it does not interfere with equipping the kitchen with two bottle holders. Just don't put them next to each other. Many homeowners like to have cargo on either side of the cooktop. This allows you to keep within reach a lot of items and products needed for daily cooking.
Design
Most often used in kitchens two or three tier iron baskets. The first ones are especially popular - classic two-level cargo, where drinks, oils and seasonings in bottles of different sizes fit perfectly.
Three-tier baskets are more suitable for jars, boxes, and other non-vertical kitchen items.
For spacious rooms may be relevant multilevel bottle holders almost human height, where tall vessels, and flat tin cans, and trays with trays, and much more are placed.
If the inhabitants of the apartment (house) are accustomed to keeping towels in the bottle, it is best to equip it towel holder.
To glassware inside the cargo did not fall and did not ring when extended or turned, it is desirable that there were bottle dividers.
And for complete comfort in using a roll-out basket, it is necessary to choose models equipped with closers and devices for soft, silent closing.
Dimensions
Typical cargo dimensions are 100 - 200 mm with an interval of 50 mm. However, it should be borne in mind that in stores the price tags indicating the width of the bottles do not mean the parameters of the products themselves, but of the boxes or niches where they will be built. For example, if you see a bottle holder with a label “width 200 mm” on sale, you can safely buy it for a cabinet with a front width of 200 mm.
Non-standard cargo sizes can reach up to 450 mm. In such baskets it is convenient to keep not so much bottles as voluminous culinary items - pots, pans, cauldrons and even household appliances. For example, to get a large pan that is rarely used from the depths of the cabinet, you don’t have to stir up a pile of dishes - just pull out the cargo and the desired item will be at hand.
Mounting method
Bottles that are mounted inside a furniture box or in a niche of a room are called built-in. They are usually hidden kitchen fronts and are convenient in that they allow you to ergonomically use a narrow space that is not suitable for other purposes.
Built-in cargo also differ in the place of fixation. The most stable and reliable is considered side cargo mount, in which the guide rails are located to the left and right of the roll-out basket.
It happens that in a narrow box there is not enough space for lateral fixation, then they use bottom. In this case, the rails are attached to the bottom of the furniture case or directly to the floor, which must be perfectly even and smooth.
There are more autonomous cargo. They can be both stationary and mobile (roll-out or portable). The location of the latter is convenient to change depending on the situation. For example, during the reception of guests, a bottle with drinks can be placed at the dining table, and then removed to the pantry.
How to choose
The price of roll-out baskets that are the same in size and configuration can differ significantly. What explains this? First of all, the popularity of the brand and the quality of fittings. To the top price category- from 10 thousand rubles. and above, as a rule, products of German and Austrian production belong. These are cargo brands such as Blum, Hettich, Kessebohmer. Average price segment- from 3 to 10 thousand rubles. - often represent bottlers of Italian (Vibo), Polish (Rejs) and some German (Vault-Sagel) factories. Economy class options - from 2 to 3 thousand rubles. - usually offered by Chinese manufacturers. What is the functional difference between expensive and budget models? The first are the most ergonomic and comfortable to use. Their rods do not rust from moisture and do not bend with a slight overload (over 12 kg). They close smoothly, softly and quietly after a light touch. Expensive fittings mean not only convenience, but also a long service life of products, at least 15 years. Such bottle holders can be installed in a kitchen with a bar cabinet, for example, as
- the dream of any hostess. Yes, what is there, and the owner too. It is not enough to correctly plan the placement of cabinets and choose beautiful facades for them. - this is what is truly valuable in any. A bottle holder for the kitchen is one of the modern fixtures for arranging. It can compactly place all kinds of gravy boats, jars, bottles, so that they are always at hand. The editors of the online magazine site have prepared material about such a kitchen "gadget" that will help you choose and assemble it yourself.
Bottle holders, no matter what anyone says, makes the interior luxurious
A retractable bottle holder is an indispensable and desirable attribute for everyone. Despite the fact that such specific drawers have been used for more than one couple of years, everyone “lusts” for them. Even owners and people with a minimum budget to buy it. Is it so convenient and indispensable?
What is stored in the bottle: sunflower oil, vinegar, sauces. In wide models you can find anything - spices, cereals, dishes. Some even order two bottles to store household chemicals in the second.
Convenience:
- all bottles in one place;
- you can put a bunch of little things;
- the completeness of the headset, especially if the kitchen is of non-standard sizes: for example, there is a free space of about 20 cm - you can’t put a drawer, and you won’t leave free space.
Of the minuses:
- if there are small children in the house, then such a box will be empty for the first three years, or even more. It's so interesting to constantly put forward a small box. In this case, you can generally forget about storing vinegar in it;
- when the bottle is less than half full, it falls when the box is opened, which is not very convenient;
- at even 15 cm to a regular box will be useful;
- important to choose correct location, otherwise you can forget about the benefits of such a box;
- considerable cost. The device of the bottle holder is not a cheap pleasure. If the budget is limited, then it is not advisable to save on, or facades just for the sake of embedding such a box;
- inconvenient to clean. The standard and simplest bottle is a regular grate without a bottom. As the practice of the majority shows, if there is sunflower oil, which is constantly used, dripping to the bottom of the box along the metal grate is inevitable. Cleaning such a design is extremely inconvenient.
Of course, everyone is guided by their own arguments when ordering and operating such a device, which can have all sorts of modifications. It remains only to decide and choose the necessary type of mini-box filling for yourself.
Types of bottle holders for the kitchen
In fact, all bottlers are very similar to each other. If, not to take into account, of course, the author's work. Therefore, understanding them, as well as making a choice, is not difficult.
According to the installation method
According to the principle of the device:
- embedded- we see these in every modern kitchen set. They are made in the form of ordinary grills, or with other filling, for example, with coasters for spoons or with a panel for lids;
- autonomous. The name itself speaks for itself. Such designs represent, which can be delivered to an existing headset at any time, as well as able to "exist" without it on its own in any corner of the kitchen. A striking example is the modular kitchen systems from IKEA.
Both designs can be assembled and installed independently.
The design of the bottle was originally invented to store wine. The first models were bulky and could take up the entire basement. Later, smaller versions "migrated" to walls, cabinets and kitchen islands. In Russia, most often, bottles are used to store oils, sauces and spices. However, you can find anything in them.
They also order special filling for spoons, ladles, small pots, lids, cereals, dry spices, canned food, towels, baking sheets and other things necessary for every housewife. Someone manages to store even in them. There are non-standard models that look like ordinary drawers - a great option for those who have a lot of different bottles. It all depends on the requirements and imagination of the customer.
"Stories"
The standard bottle holder, as many people imagine it, has two tiers. On request, you can find both in three and in four with different heights of individual models. For the "fans" of such cabinets, you can make whole columns more than a meter high.
Today, the entire Internet is excited by the interesting design of a retractable wooden bottle holder located in a narrow space behind. Saving usable space and using unclaimed space behind appliances. The option is suitable for any size, and you can also make it yourself.
Where are bottlers located?
Not only the convenience of using it depends on where the bottle is located, but also, in principle, the relevance of use. Therefore, before buying, it is desirable to clearly determine where it will be located.
Upper and lower cabinets
Near or in the lower drawers - these are the most common locations for bottle holders. Of course, the nature of the filling also affects this.
For those who do not want to bend down each time for frequently used utensils or products, they place such a design in the upper cabinets. The solution is non-standard and more suitable for tall owners.
Another location option is the middle zone between the upper and lower cabinets. Yes, in the middle of the headset, such a cabinet will look awkward, but near or a pencil case - quite succinctly. Of the minuses, it can be noted that such a cabinet "eats". But everything you need is always at hand.
Separate column cabinets for tall bottle holders for the kitchen
Columns, or sliding cabinets, canisters, are independent system storage. They can be made as a single structure, or have several drawers.
You can order a similar cabinet as a built-in unit. It is also possible to purchase it separately and install it yourself. At the same time, the choice of facades of such finished cabinets is quite large.
The most convenient placement of such a cabinet-column is next to the refrigerator. Pretty handy headset. In it, you can safely place all your jars, bottles, canned food, alcohol, and you never know what else you can put there. It all depends on the size. Usually, the height varies from 1200 to 1450 mm, while the width of the facade is 300 mm. The filling can be different - from three to six standard shelves for bottles, the presence of closers for soft closing, additional storage elements, ordinary ones, supplemented with drawers.
The acquisition of such a full-size bottle is a really expensive pleasure. For example, a kitchen bottle holder with a height of 1200 mm, with a facade width of 300 mm and four regular shelves of the Titan Arena brand will have a price of 30,000 rubles.
If desired, you can assemble a similar design yourself from the usual furniture material. It remains only to find a suitable content and carefully study the video master class presented below.
Features of bottles for the kitchen of different sizes
Another classification of cargo, and determining for many kitchen sets, is the size. Let's analyze the standard models of bottle holders, which are most often built into small but functional sets of Russian kitchens.
Bottle holders for the kitchen 200 mm with a closer
Cargo with a base width of 200 mm or more are designed for large kitchens. A decent width of the shelves allows you to store in such a cabinet not only a lot of bottles, but also various products.
In comparison with conventional cabinets, they save space, and at the same time, they are practically not inferior in terms of occupancy, especially if we consider cargo in three or more tiers.
Kitchen bottle holders for the kitchen 150 mm with a closer
Medium-sized bottles have a base width of 150 mm to 200 mm. The most practical designs with a side mounting method or as free-standing elements of the headset. The presence of a closer ensures smooth closing of the drawer. It is also worth bearing in mind that the presence of such accessories increases the cost of cargo.
Ordinary bottle holders for the kitchen 100 mm with a closer
100 mm - the optimal width of the bottle in a narrow or simply compact kitchen set. But even such a small area is enough to accommodate various bottles and small ones, for example, baking sheets. Bunk cargoes of just this width are the most popular, as they are the embodiment of low cost and functionality.
If, during the operation of such a cabinet, it turns out to be “not enough”, due to the versatility of the design and fastening, you can order another one or buy a free-standing structure.
Which bottle is better to buy for the kitchen
For a kitchen set, first of all, its functionality is important, and only after that - beauty and style. This also applies to the bottler. Its effective use directly depends on how correctly it is selected. Consider the basic principles that you should rely on when selecting bottle designs.
By the size and number of shelves of the bottle in the kitchen
There are basic parameters for selecting cargo for a headset that need to be thought out in advance.
- Size. To store a bottle of oil and small spices, a 100 mm bottle is enough. If you plan to place detergents there and, then it is better to opt for a cargo of medium width - 150 mm.
Cereals and other products can easily fit in lockers with a width of 200 mm. In wider bottle holders, you can store entire services.
- Number of shelves. Standard cargo has two shelves. The bottom one is for tall bottles, the top one is for small containers.
Three-tiered designs are convenient for those who constantly keep on hand many small containers with spices and sauces. There are also single-tier bottle holders, where on the top of the basket there is a place for towels and napkins, at the bottom - for tall containers.
Note! If the fittings are of high quality, then the height of the existing shelves can be adjusted independently.
According to the method of fastening
From wide model range kitchen bottles can be distinguished only two types of their fastening:
- bottom. Relevant for wide baskets that can withstand a large filling weight. Allows placement in any part of the kitchen set.
- lateral. This installation method is relevant for cargo with a width of not more than 2500 mm. Differs in more flexible adjustment of facades and reliable fixation of fittings.
As for the self-assembly and installation of bottles, there are no obstacles, either for one or for another type.