A few years ago, curtains began to be replaced everywhere with blinds. Now they can be found in offices and living spaces, in shopping areas and on the windows of cafes and restaurants.
Features of installing blinds
In order for blinds to serve for a long time, you need to be extremely careful when installing them. Only a balanced, competent approach will ensure the normal functioning of this rather complex structure. But if you understand all the nuances, you can install blinds in place very quickly.
Useful information:
The main thing is not to forget about the features of each design and take everything into account in the assembly. The installation process is influenced by the walls, namely how smooth they are. Any deviations from the correct level, both horizontally and vertically, will lead to significant complications during operation. Therefore, if in your case there are obvious curvatures of the walls, it is better to invite a specialist with experience in solving such issues.
If you still decide to install blinds on your own, you need to study the available information, delve into all the details, and be patient.
Basic methods of installing blinds
When choosing an installation method, you should be guided by your preferences. You can decide which method is right for you based on the design of the window. In principle, blinds can be installed on any windows, including attic windows, but the mounting method will have its own characteristics. The sequence of actions will be similar in any case. Installation methods differ from each other only in some small details.
Sequence of actions when installing blinds
Measuring is the first step
First you need to correctly measure the window opening. Each type of installation has its own nuances that must be observed when taking measurements. This must be done in order to navigate the size of the blinds and decide on a suitable design.
Advice! Subtract 2 cm from the resulting dimensions of the window opening if it is decided to attach the blinds directly to the window opening. This technique allows you to accurately determine the required size, therefore, in the future you will not have to deal with the problem of too long blinds that rest against the window sill and bend unsightly.
If you decide to attach the blinds with an overlap, you need to add 5 cm on each side in width so that the window is completely closed. The length will depend on your preferences or the designer’s advice. It can only be slightly below the window sill, or it can reach the floor. If you plan to attach blinds to each window sash separately, then you need to measure these parts of the window without taking into account the fittings. When taking measurements, you must try to be punctual. Only correct measurements and ideal geometric proportions will give an impeccable appearance and uninterrupted operation of blinds in the future. If the measurement reveals the curvature of the window, you should try to adjust the parameters to the correct figure.
Marking - step two
Before installation, mark the fasteners. Since the design of any blinds is geometrically verified, markings must be carried out with millimeter precision; symmetry is also of great importance. While marking, you need to check how the light-protective devices that you have prepared will work. Will it be possible to open and close the window freely after installing them? Having determined where the control cord will be, you need to mark this place and make additional fastening in this area. It is necessary because more pressure will be put on this area.
Installation - step three
Guided by the markings, you need to attach all existing parts using dowels and screws. They are screwed into the wall or ceiling. The cornice is hung on these screws. It is used to fix runners and slats, which are simply threaded into the prepared cornice. After completion of work, the functionality of the light protection device is checked.
Features of installing blinds on plastic windows
Quite often it is necessary to install blinds on plastic windows. And this is not very simple. In this case, both the blinds themselves and the window can be rendered unusable quite quickly. To avoid unpleasant consequences, all manipulations must be carried out with the utmost caution.
Basic subtleties that need to be taken into account when working with different types of blinds
Vertical blinds
The most popular is the vertical variety. It is used in offices, public institutions and in ordinary home environments. Color variations are limitless, and the ability to combine colors and shapes gives scope to the most daring design ideas. To install vertical blinds, you need to prepare all the necessary elements:
- cornice;
- slats;
- runners;
- chain.
If the window has an unusual format, you should provide a chain of appropriate length so that it looks appropriate and does not limit the functionality of the entire device. Vertical blinds can be mounted to the wall or ceiling. If you decide to mount the device to a wall, you can choose an area just above a window or directly near the ceiling. If you attach the cornice to the ceiling, then you need to choose an area close to the wall surface at a distance slightly greater than the width of the lamella.
When blinds of the required size, color and quality are purchased, markings are made for the fastening elements and they are installed. Once the brackets are installed, the cornice is attached to them. Runners are put on the cornice and slats are hung on them. When hanging the slats, you must follow the order in which they were placed in the packaging.
Finally, you should take care of the weights. This type of blinds cannot function without them. These weights are suspended at the bottom of the device on chains on both sides (inside and outside). All .
Video on m installation of vertical blinds
Horizontal blinds
This type of blinds has not lost its relevance for many years. Plastic devices are used everywhere, because they are so easy to choose by color and size.
Their design features sometimes cause difficulties for beginners, and they cannot install this type of window decoration.
Horizontal blinds are most often installed on the wall, sometimes they are attached directly to the window. They are mounted to the wall if it is necessary to completely decorate the window opening. Attaching to a window means mounting to the sashes; this option does not limit the functionality of the window itself. It can be easily opened and closed without any obstruction.
Self-installation horizontal blinds includes the same steps as in the case of the vertical variety:
- froze;
- marking;
- cornice fastening;
- installation of blinds.
Before you drill a hole, you need to make sure your markings are correct. To do this, the fasteners are inserted into the cornice and pulled by the cord. Let the blinds open all the way. Next, they are brought to the intended mounting location and visually assessed whether the markings are applied correctly and whether the blinds will open smoothly if they are mounted as planned. If there are distortions, you need to make more correct marks with a pencil. Then the brackets are removed from the cornice, they are brought to the marks and points are precisely placed in the places where the self-tapping screw will be screwed in.
Videos installing blinds on plastic windows
Advice! It is better to first drill the holes, and then bring the part to this place and attach it. This method ensures that the integrity of the plastic is maintained. After all, screwing a self-tapping screw through a fastener often ends in the appearance of cracks.
When the holes are ready, the brackets are screwed to them and the cornice is hung. It is inserted into the fasteners, and then they are closed. Next perform the following actions:
- installing a hook in the control mechanism;
- installing a cane in a hook;
- the tip is attached to the cane;
- installing a bell, securing it with a knot;
- blinds are lowered by a cord;
- installation of lower fixation with a self-tapping screw.
In general, installing blinds is not difficult. However, you must comply with all requirements, be careful and careful. You cannot ignore the instructions that come with the purchased blinds.
Video m installation of horizontal blinds
Installation of blinds without drilling
Some types of modern brackets can be attached to the frame without drilling. It's very convenient. Such blind systems are mounted on brackets using conventional snaps. In this case, they are not only easy to attach, but also easy to remove to wash the window or tidy up the slats themselves. To attach the brackets without drilling, you need to purchase a special variety of these fasteners. L-shaped brackets are needed; they can be easily hooked onto top part casement windows. They can also be easily removed if necessary. But such a bracket cannot be attached to a blind sash; this is only possible with opening sashes.
Secure the blinds to plastic window maybe two various options. Let's look at the advantages and disadvantages of different mounting methods and find out how to hang blinds with your own hands.
For some interior planning cases, blinds may be preferable to curtains. Their main advantage is the ability to regulate the light output. All you need to do for this is to rotate the slats to a larger or smaller angle relative to the surface of the window. There are two main methods used to attach blinds. Let's analyze their advantages and find out. How to attach them with your own hands.
How to take measurements correctly
First of all, the blinds must be correct size. To do this, you need to decide on the method of fastening. Methods can be divided into two groups:
If you plan to install blinds on several windows, you should measure each opening separately. Although it seems that the window openings are exactly the same, this is not always true. A discrepancy of 2-3 cm can lead to consequences that are difficult to eliminate.
If you plan to mount a vertical structure, it is necessary to measure the height and width of the window opening. You should be careful when measuring, since you can shorten slats that are too long, but adding additional elements to narrow blinds will be problematic.
If the model has horizontal lamellas, the measurements will be somewhat more complex. If the blinds are attached to the opening, you need to determine what the width and height are. The length of the canvas is selected at your own discretion. You can find both models that reach the window sill, as well as long options that reach the floor. If necessary, blinds with plastic or aluminum slats are not difficult to make shorter.
When installing directly on the frame, you will need to consider whether the window will open.
If the window is solid and does not open, you can measure the entire width of the opening. If the shutters will open, it is worth ordering a separate structure for each half of the window. Measurements should also be taken accordingly. Measure the parameters of the glass (width x height) and add 20 mm on top and 5 mm on the edges.
When designing blinds attached directly to the frame, make sure that they will not interfere with the operation of the fittings and will not become an insurmountable obstacle to its maintenance (lubrication, adjustment, etc.)
Preparatory work
So, the mounting method has been determined, the blinds have been selected, ordered, manufactured and delivered to the apartment. What to do next? Before you start attaching the blinds to the window, it is worth doing some preparatory work.
First of all, you need to unpack finished product, carefully untangle all the cords, without leaving the slightest knot, and examine the finished product. According to the attached instructions, you must carefully check the completeness, make sure that all structural elements are in place and look exactly as in the instructions.
If at the packaging stage something is mixed up or not included in the box, the blinds will not be installed. It is better to immediately file a complaint with the manufacturer than to look for a replacement or improvise, trying to do without the missing part.
You also need to prepare the window itself. You need to remove all unnecessary items from it. It is worth protecting the window sill and the nearest meters of floor with newspapers from dust and the inevitable debris when drilling. It is also worth making sure that you have reliable support for your feet (stepladder or sawhorse), so that the drill cord allows you to reach all drilling points.
Preparatory work when attaching blinds is not complicated and does not take much time. But if all these operations are not done on time, the installation process can take a significant amount of time and require a lot of labor.
No drilling
Modern plastic double glazed windows allow you to install blinds without using an electric drill. There may be several reasons for choosing this mounting method. For example, under the terms of the lease agreement, it is prohibited to carry out such manipulations in rented housing. Other reasons may be the lack of the necessary power tools, reluctance to tinker with drilling or spoil the surroundings.
First of all, it is worth considering that fasteners without the use of drills and screws are usually less reliable. This means that only lightweight structures can be secured in place in this way.
Usually the lamellas in them are arranged horizontally and are made of thin and light polymer. For heavier models, it is still worth choosing a fastening method using self-tapping screws. You can usually find out whether the selected model can be hung without drilling from the included instructions.
To work, you will need double-sided adhesive tape and scissors. The operating procedure is as follows:
The last stage of installation is attaching the adjustment strips to the block and installing the slats in place. The reliability of the fastening allows the blinds (provided that the model is not too heavy) to hang in place for several years without distortion or separation from the attachment point. However, when cleaning (removing dust from records), you must act carefully so as not to tear off the structure.
If you eventually need to remove tape-mounted blinds, this is quite easy to do. A special liquid (for example, Anti-Scotch composition) will help remove traces of glue.
But if you don’t have a professional solvent at hand, you can use a rag soaked in WD-40 or vegetable oil.
Required materials and tools
Now let's look at fastening with self-tapping screws. This is a much more versatile option that allows you to hang almost any model using any mounting method (on the ceiling, in an opening or on the walls).
First of all, you should pay attention to the quality of the fastening elements included with the blinds. Sometimes manufacturers (this statement especially applies to cheap Chinese-made models) include too short and thin self-tapping screws made of low-quality steel. If you plan to attach heavy structures to the ceiling, it may be worth purchasing something more reliable.
Also for work you will need:
- Measuring tools: pencil, ruler with bubble level, tape measure.
- Drill. The drill bit for the drill is usually #6.
- Dowel and hammer.
- Brackets for mounting (usually included with the product).
- Scissors.
- Screwdriver.
Having prepared a set of tools for work, you can begin.
How to hang blinds on plastic windows with your own hands. Step by step instructions
The installation process usually does not cause any difficulties even for those who do this work for the first time. We will review the installation operations vertical blinds. Here are the main operations that need to be performed:
- First of all, mark up. The brackets are usually mounted at a distance of 90 - 100 mm from the cornice. Mark the holes for the brackets with a pencil and drill them.
- Insert into the holes plastic dowels. Insert the self-tapping screws into the holes in the bracket and screw them into the dowels.
- Install the cornice with attached decorative panels onto the brackets.
- The runners are assembled according to the instructions given. You need to attach the canvas to them and thread them into the cornice.
- Weights are inserted into the lower part of the canvases. A decorative chain is attached to them.
- Stoppers are inserted into the ends of the cornice and covered with decorative plugs.
The installation of horizontal blinds differs slightly. The main difference is greater sensitivity to strict adherence to horizontal installation.
After assembly, it is important to carefully check the operation of all elements of the system (make sure that you can open and close the blinds, and also change the angle of rotation).
Here are some tips from professional installers:
- Before purchasing, make sure that the kit includes the necessary brackets. For some companies, the price of the kit includes only the canvas, and fastening and adjusting structures must be purchased separately.
- If defects are found, you do not need to try to fix them yourself. Contact the manufacturer for replacement or repair.
The main thing in any work is accuracy and adherence to technology. If you do everything correctly, you can hang the blinds with your own hands, quickly and without much difficulty.
Methods of attaching blinds to a window depend on their size and design. How to hang blinds with vertical and horizontal panels? Can blinds be attached without drilling? To understand the features of fastening, you should determine how they differ different models and what are their functions in the room.
Vertical blinds with print
What are they for?
The functions of blinds are multifaceted. They effectively protect furniture and wallpaper from sunlight, hide the room from prying eyes, make it possible to regulate the necessary flow of light, and are easy to care for. Blinds are also a very stylish window decoration. The variety of colors and materials used for their manufacture allows you to attach these curtains to any room.
There are 3 types of blinds, each of which has its own mounting nuances:
- Horizontal. Such models are most often used in various rooms. They can be hung in several ways: in the window itself, on each half of it separately, or on the outer wall above the window.
- Vertical. They successfully replace tulle and curtains in residential and office premises. Vertical blinds can be hung by attaching them to the wall above the window opening or directly to the ceiling.
- Rolled. This type is most popular in modern world. The model performs all the functions of blinds, goes well with regular curtains and suits any interior design. Roller blinds are attached to the window using special brackets, adhesive tape, or screwed with self-tapping screws to the window bead.
Measurements for horizontal blinds
How to take measurements?
If you decide not to use the services of a specialist, but to hang the blinds yourself, you need to take the correct measurements, since the ease of use of the curtains will depend on this. If you are installing vertical blinds, you will need to know the dimensions of the window opening. Measure the height and width from the mounting points. Be careful: shortening long curtains will not be difficult, but adding slats to curtains that are too narrow will not work.
Related article: How to do wall gating in panel house with your own hands?
Measurements when installing a horizontal model will be more difficult. If you are attaching curtains directly to the window, you will need its width and height. The length of the blinds can be chosen as desired: they can be up to the floor or cover only the window sill. If necessary, blinds made of aluminum and plastic can be easily shortened or adjusted using the built-in mechanism.
If the window is blind, you can fix the curtains inside. For an opening window, separate blinds for each half are suitable. In this case, measure the width and height of the glass, and then add 2 centimeters on top and 0.5 centimeters on both edges. It is important that the existing window fittings do not interfere with the functioning of the blinds. Using the same principle, measurements are taken to install roller blinds.
You can take all the necessary measurements and order blinds using these data. However, in this case you will spend more money than when purchasing standard models. To save money, find out in advance what the size chart is and select the appropriate fastening method. If you have difficulty taking measurements, watch the instructional video.
Mounting diagram for horizontal blinds
Mounting instructions
After you have taken measurements, proceed directly to installation. You will need: pencil, screwdriver, brackets, drill (6 mm drill), hammer, scissors, dowel and screwdriver. How to attach blinds with horizontal panels? This process is carried out in several stages:
- step back 6 cm from the glass on both sides, mark the required place with a pencil, make sure that the line is straight, otherwise crooked curtains will not work well and will quickly fail;
- using a screwdriver, make holes into which you will attach the brackets;
- if the window opens, make holes in the upper part of the sash, but if the window is solid - on the outside of the glazing bead;
- insert the blinds into the brackets, snapping them into place;
- Make a hole for the fastener at the bottom or side of the window sash;
- lower the blinds and check their operation;
- If at any stage you have difficulties, watch the video, which shows in detail how this process occurs.
Related article: How Roman blinds are attached to curtains on plastic windows: features and nuances (photos and videos)
Installation of vertical blinds
To attach vertical curtains, use the following instructions:
- Use a pencil to mark the brackets (they should be located at a distance of 10 cm from the edge of the cornice);
- Having drilled a hole, insert a dowel into it and secure the brackets using self-tapping screws;
- mounting brackets and decorative panels install on the cornice;
- assemble the runners and secure the fabric in them;
- Weights are attached to the lower part of the blinds, then a decorative chain should be hung;
- install the decorative panel into the mounting brackets by inserting the end corners and side panels into its ends;
- check how vertical curtains work using the control cord and chain;
- watch the tutorial video to make sure you did everything correctly.
Fastening roller blinds
Roller blinds can be secured either with self-tapping screws or without drilling. The most popular are blinds that can be hung directly on the window sash. To do this you will need double-sided tape, adhesive tape or liquid nails. This method is suitable for both fixed and operable windows. Do not forget that the frame must first be washed and degreased with alcohol. More reliable is fastening with self-tapping screws, which is carried out according to the principle of installing vertical blinds.
Blinds are a design that does not require careless handling and, if used incorrectly, quickly fails.
- Before purchasing blinds, find out what is included in the total purchase price. Some companies offer to pay only for the canvas, and all components (controls, curtain rods, weights) will have to be purchased additionally.
- When choosing curtains, pay attention to the material from which the canvas is made. Bathroom blinds should be plastic: they are easy to clean and are not afraid of high humidity. Fiberglass or aluminum should be hung in the kitchen, as these materials do not burn. Fabric blinds are ideal for the bedroom, living room, and dining room.
- During installation, pay attention to the panels: if they open smoothly, the service life of the blinds will be longer.
- If you find any defects: the plates stick, do not turn, the runners are stuck together, etc. - do not fix them yourself, but call the company where you purchased the blinds and call a specialist;
- New blinds have protective coating, which washes off over time, so you don't need to clean them too often. It is best to completely soak the canvas in a container with liquid detergent, and then wipe with a soft sponge and rinse.
- Use curtains carefully. Opening and closing vertical blinds while sharply pulling the cord can damage the fastening and cause the panels to fall out.
Installing blinds solves many problems with window decoration. Curtains, drapes, tulles, no matter what fabric they are made from, require frequent washing, since dust and dirt accumulate on them. The thickness of the curtains determines how well they transmit or block light. Blinds are much more convenient than curtains in many aspects. Depending on the angle at which the lamellas are located, they completely open access to natural light into the room, partially block it, gently diffuse it, or completely isolate the room not only from light, but also from thermal radiation. They do not require special care, and installing blinds yourself is not difficult. The light-protective design with horizontal lamellas has become familiar, almost classic for window design. Advantages: Some disadvantages are worth mentioning: They are distinguished from horizontal ones by: Vertical blinds, as the name suggests, are a simple and convenient light-protection structure consisting of longitudinal vertical plates. Roller blinds and roller shutters are solid fabrics, often made of textiles, but other materials are also possible, which, like horizontal blinds, are rolled up. The height can be adjusted by fixing the curtain with a weighting agent on the bottom strip of the canvas. There are different types of roller shutters: with an open drum (for mounting directly on the window) and with decorative cornice; “mini” for installation on each frame separately and “roll-cassette” for covering the entire window. There is an opinion that roller blinds are the most budget-friendly and practical option window decoration, but this is not entirely true. Of course Roller shutters have their advantages: variety of natural and synthetic fabrics, colors and patterns, ease of care (allowed wet cleaning) and operation, the ability to fix the curtain at the desired height, special impregnations against dust, moisture, high temperatures and glare, compatibility with other types of curtains. It is convenient if you need to hide a room from the sun, or decorate a window with beautiful tulle so that from the street you cannot see what is happening inside. But with so many advantages, they also have significant disadvantages.: This type of blinds is similar to both horizontal and roller blinds. The design consists of a control mechanism (chain or electric drive), weights, and pleated fabric that resembles accordion bellows. The range of materials, colors and textures is very diverse. Peculiarities: Types of pleated: Such systems involve either the use of horizontal slats or a solid fabric, but are not horizontal blinds or roller blinds. They differ in the types of cassettes (angular, round, flat), controls ( various types mechanical and remote), materials used (plastic, textiles, bamboo, aluminum). Their main feature is their design, the special structure of which makes it possible to fix the blinds at a minimum distance from the window glass. This prevents deformation, sagging, wrinkles and unevenness, and completely opens the window sill. Advantages: There are three types of fastening blinds: to the wall, to the ceiling, directly to the frame, and two ways - with and without drilling. The universal basis of any fastening is the cornice, which in different ways attaches to a wall, frame or ceiling. This is done using self-tapping screws, brackets on which the cornice and fishing line are installed. Additionally, you will need a pencil, ruler, drill, and screwdriver. First you need to make markings in the places where the brackets will be located. For reliability and accuracy, it is necessary to drill holes for the clamps in the marked places. Then, applying the brackets one by one to the PVC frame, use a screwdriver to secure them to the markings. Next, the cornice is installed and the entire structure is assembled. If you plan to replace blinds or other window decoration options in the future, it is not recommended to damage plastic windows. The holes from the screws will remain in the frame forever and will significantly spoil the appearance of the windows. In this case, it is easier to turn to a method that does not require drilling. In this case, the brackets are attached in two ways: Mounting blinds on the balcony requires a special approach. Plays an important role here balcony design. The type of glazing determines the possibility of choosing certain blinds and the method of their fastening. In general, almost all options are available for balconies. Particular attention should be paid to the type of blinds, since not all of them are universal for different types windows For example, horizontal blinds are not suitable for a balcony with sliding windows, as they can become deformed during use or from strong winds. The final result depends on how correctly the measurements are taken. Even expensive, beautiful models will not look good on the window if there are gaps in the opening or the edges of the slats constantly ride up against the wall. It is important to pay attention to the following points: If you plan to attach blinds to the movable half of the window, you will need to measure the gap between the glazing beads and add 30 mm or more, which will prevent gaps from appearing in the structure. The height of the blinds is equal to the height of the window sash. For installation inside a window opening, measurements are required at three points in height and width, since openings are not always absolutely proportional. The width is identical to the wide side of the glass plus the thickness of the rubber seal. The length is identical to the height of the window (including elastic bands) and has a margin of 1cm. To install the cornice, you will need an additional 30-40 cm to the slopes and hinges. The control chain is 2/3 of the window height. When choosing to fix the cornice on the wall, the width parameter increases by 10 cm, the height is measured from the point of attachment of the brackets to the floor at random. When installing in a window opening, you need to determine the width at the top of the arch and subtract 20 mm. To determine the height, compare the height of the left and right sides of the arch, subtract 1 cm from the smaller value. For wall mounting, you need to add at least 10 cm to the wide side of the slope. The length of the slats can be any, but it is recommended to retreat 2 cm from the edge of the blinds to the floor. Ceiling installation involves determining the height (to the floor or window sill) minus 2 cm, it is recommended to increase the width of the arch by 100+ mm. To install canvases to the wall, only one measurement is required - from the edge of the window sill to the markings for the brackets, and the width can be up to 300 cm. In the window arch, roller blinds are installed after measuring the width, from which you need to subtract 4 centimeters, and the length of the curtain is equal to the height of the window minus 15 mm. Pleated curtains similarly do not require a professional approach to taking measurements and installation. Vertical blinds are the most convenient way to decorate a window yourself. They are attached in three ways: to the ceiling, to the frame with drilling, to the frame without drilling. In all cases, the fastener is a cornice with or without a decorative facade. The brackets on which the structure is supported are fastened with self-tapping screws, hung or glued with double-sided tape. The special tape, despite its seeming impracticality, is fixed very firmly, so it is important to correctly apply the markings for installing the brackets. Once they are glued, moving them will be very problematic. The procedure for installing vertical blinds: For installation you will need a set of tools: drill, Phillips screwdriver, screwdriver, drawing supplies. The instructions for installing horizontal blinds on windows contain a list of items that are carried out step by step: Working with horizontal models on inclined surfaces requires a little more effort and skill. Like other types, roller blinds or shutters are attached in several ways: they can be hung, glued, or attached to a frame. First way– the simplest and most accessible for do-it-yourself installation is a fastening without drilling based on double-sided adhesive tape. Suitable for tilt-and-turn mechanisms on windows. Performed step by step: The second method involves attaching to a stationary frame (not opening): You can also install cassette blinds yourself. Before installation, you must read the instructions, make sure everything is complete, and prepare everything necessary tools: screwdriver, drawing tools, screwdriver, drill, cotton pads or small piece of cloth, degreaser. When everything you need has been collected, you can proceed to the first stage - degreasing the glazing beads. Then you need to remove the side covers of the box, lift it to the top of the frame, focusing on the guide protrusions, drill holes for fastenings, and secure with screws. You can use a screwdriver for this purpose, or you can perform the process manually using a Phillips screwdriver. Once the box is installed, you need to secure the covers to the sides. After this, you can glue the guide strips to the degreased frame. The guides should be several centimeters below the corner of the bead. Installation work window design requires certain skills and experience, but if you want to try it yourself, you need to take into account some of the nuances and features of this work. Installation of blinds begins long before preparing the working surface and a set of tools. The first step of this process– an informed decision regarding the type and variety of blinds, material, color and texture, depending on the functionality of the room. Thus, it is more advisable to choose vertical blinds for the living room that let in light, for the bedroom automatic roller blinds with electric drive made of blackout fabric, and for the kitchen, where the smells of cooking and combustion products of food are constantly in the air. plastic blinds that do not absorb grease and dirt. Second important point- this is the correct marking. A lot depends on it, including how easy the installation process will be. If all the architectural features of window openings are taken into account by specialists when ordering blinds from them, everything will go easily and smoothly without the help of professional installers. It is also important to consider whether it will be possible to open the window after installation, how the light protection devices will work, and whether there is a risk of their deformation. The installation of blinds must be carried out exactly with the markings and subsequent verification of the functionality of the structure. The most important point here is the choice between fastening - with or without drilling. It is also necessary to provide for the type of control. For low windows great solution is one of the varieties of mechanical direction. Magnetic, automatic (electric) control with an electric drive is suitable for roof and inclined windows, windows in the bedroom. Vertical blinds are quite simple in design, so there are no problems with them during installation and operation. This explains their high popularity, both when arranging residential premises, and when working with the interior space of offices. If you haven’t bought them yet and doubts creep in, check them out. You can install vertical blinds yourself; you don’t need any special knowledge or skills to do this. But in order to avoid the most common mistakes, some features should be taken into account. Useful information: Of course, you will need minimal knowledge of working with a hammer and drill, but this is unlikely to be a serious obstacle for anyone. This type of work will not require you to have a specific professional tool, but correct selection will greatly simplify the task. It will be easier to do the work, and the result will be much better. So, we need: This type of blinds can be installed in three different ways: on the sashes, in the opening and overlay. You have to make the choice yourself, based on your own preferences and architectural features of the room. The main criteria that you should pay attention to when choosing an installation method are the size of the blinds and the size of the window opening. When installing blinds in an opening, the situation with the size ratio is the opposite - the height of the opening should be 2 cm larger and the width 4 cm larger. A small space should be left in the upper part of the window, which will ensure correct opening/closing of the window. If installation will be carried out on the sash itself, then the blinds should be 3 cm wider than the last one. After choosing the method of installing vertical blinds, you should begin fitting. The dimensions must be kept exactly. Cutting the blinds can be done with scissors, and a hacksaw will help with the metal guide rail. After adjusting the dimensions, you should begin marking the future fastening of the blinds. Immediately think over the fastening so that after installation their presence does not interfere with the normal operation of window mechanisms. The window must perform its function. This installation stage can be divided into two substages: installation of the guide rail and installation of the blades themselves (lamellas). To ensure that the outer slats do not touch the slopes, when installing the guide rail, a minimum offset on both sides should be maintained (6 cm). Otherwise, they will constantly scratch the walls, spoiling their appearance, and their own too. If architectural features rooms require a certain distance between the blinds and the wall, then you should buy and install a special bracket. It can be adjusted in length by releasing the screw in the middle. The guide is installed on the clamp. Their number depends on the length of the guide - one clamp per 50-70 cm of guide length. The clamps are installed either on the bracket or directly on the ceiling. Various methods of installing blinds require in various ways installation of clamps. You can use both screws and “quick installation”. It should be remembered that they are attached with a long shank towards the window. With the help of this tail, the clamp is released when the guide is removed. After installing the clamps, the guide itself is attached to them. One edge of it is inserted into the clamp, after which it is wound with the second edge until a characteristic click is heard. The blinds, which act as curtains, are installed in the clamp of the rotary-opening mechanism. You may need an assistant for this job, as the weight of the blinds can quickly get your hands tired. When hanging the slats, make sure that in the closed position the seam between them is not turned outward. To control the blinds, a special cord is used, on which the included weight should be hung. This will prevent the cord from getting tangled while the blinds are in use. Using a lace, you can move the slats apart and move them, and open and close them using a special chain of balls. After completing the installation process of vertical blinds, check that they are working correctly. Some manufacturers do not extend warranties to models that were installed by customers themselves, keep this in mind. Tweet Stammer Like
Varieties
Horizontal
Vertical
Rolled
Pleated
Cassette
Mounting methods
With drilling
No drilling
Measurements and markings
Horizontal
Vertical
Rolled
Installation of vertical models
Installation of horizontal
How to hang roller blinds?
How to secure cassette tapes?
Important nuances
Selecting the necessary tool
Methods for installing blinds
Overlay
On the sash
Installing blinds step by step