Plastic and aluminum blinds protect the room well from the effects of bright sunlight, which is very important in rooms that are located on the sunny side: in offices and living rooms, where the glare of the sun can interfere with watching TV or working on a computer. It is also convenient that the installation of horizontal blinds on plastic windows DIY is simple and does not require special skills.
Installation Features
The standard kit usually includes brackets, all consumables (bolts and dowels or tape), as well as instructions on how to install horizontal blinds on plastic windows. There is nothing complicated about it: first, brackets are mounted on the window, sashes or opening, and then a cornice is inserted into them.
There is no need to worry about how to properly install the lamella system on the cornice: the manufacturer has already done this for you. Therefore, the entire installation process comes down to just mounting the side brackets and takes a minimum of time.
Installation of horizontal blinds on plastic windows can be carried out with drilling, without drilling (using double-sided tape) and on drop-down brackets. The choice of method largely depends on where exactly you plan to secure them.
Where to fix the blinds
Before hanging the blinds, please note: manufacturers provide a guarantee for blocks with a width of 22 cm to 220 cm and a height of up to 250 cm. A smaller width does not make sense, and for a larger one it is recommended to use two independent block. Blinds for large plastic windows are also available for sale, but they are attached without a guarantee for the functionality of the structure.
How to make dimensions
Before installing blinds correctly, you need to take measurements. All subsequent installation and performance of the block system will directly depend on how accurately they are carried out. Instructions for taking dimensions are different for each installation location:
- Inside window openings (suitable for cases where the window is located in a recess in the wall). It is important here that the slats do not touch the slopes when lifting and lowering. Based on this, we select the width of the block so that it is 4-5 cm (2-2.5 cm on each side) narrower than the window opening. The height of the entire curtain should accordingly be set 2-2.5 cm shorter than the length of the opening. To ensure that each sash can open freely when the slats are raised, a space must be left between the top edge of the window and the blinds.
- Outside window openings (also suitable for cases where window unit placed in a recess in the wall). This arrangement makes it possible to cover the entire area of the opening with one wide curtain and, if necessary, darken the room more effectively. To do this, it is necessary that the width of the slats be 5-5.5 cm on each side (10-11 cm in total) wider than the window opening, and the height of the entire curtain should be 10 cm lower than the window sill.
- On window sashes (curtains open together with the sashes, suitable for the mini model). This method saves space as much as possible and leaves the window sill completely free. In this case, blinds should be attached to plastic windows so that they do not interfere with the rotation of the handles on the sashes and do not touch the window sill, but completely cover the glass. To do this, their width should be 1.5 cm on each side edge (only 3 cm) wider than the glass part of the window, and their height should be 1.5 cm greater than its length.
- Outside the window opening (carried out when the window is located on the same plane with the wall). Since the handles on the shutters extend inside the room, in this case you will need a special bracket, which will make it possible to install fixed blinds at a short distance from the wall. In order for them to completely shade the room when closed, their width should be 20 cm wider than the window opening (10 cm on each side), and their length should be equal to or 10 cm greater than the height of the window.
How to markup
In order to prevent distortions during installation, before installing horizontal blinds on the wall above a plastic window with drilling, it is necessary to make markings. Do not forget to leave enough space above the window, otherwise, when assembled, the slats will interfere with the opening of the sashes.
We will need:
- Blind block.
- Bolts and dowels to match the bracket.
- Roulette.
- Level.
- Construction pencil.
- Drill.
- Hammer.
- Screwdriver.
Operating procedure:
- Using a level and ruler, mark each side.
- Place the bottom of the mount on the reference line, then mark the drilling points with a pencil.
- Mark the markings with crosses to better identify the drilling points.
- Drill where the dowels will go, keeping the tool perpendicular.
- Insert the dowels by hand and drive them in with a hammer.
How to hang
The hardest work is behind us. All that remains is to hang the horizontal blinds in place.
Procedure:
- We install universal brackets.
- By turning the latch counterclockwise, we secure the upper cornice to the bracket at a distance of 20 cm from the edge.
- Turn the latch clockwise until it stops.
- We insert the hook of the rotating mechanism located on the upper cornice into the control handle (relevant for models with a cord and a handle).
We check the functionality of the system: raise and lower the slats, rotate them at different angles, changing the lighting, check whether they interfere with the opening of the sashes. If all these manipulations were successful for you without extra effort, the blinds are installed correctly.
In contrast to thick curtains, a lightweight slatted design made of colored plastic or aluminum painted in different colors ensures good air circulation while guaranteeing uniform lighting. With its help, you can easily protect your home from direct sunlight, and if the color and texture of the slats are correctly chosen to match the design of the apartment, they will highlight its advantages.
How to install horizontal blinds with your own hands in the video:
[Rated: 5 Average rating: 3]
Try removing the tulle and curtains - and you will see how empty the room becomes. Nowadays they create a large number of curtain options. It's not just about the fabric. Today, blinds are very often used as curtains. They perfectly protect the house from sunlight and prying eyes. These products are easy to install and dismantle. However, some face certain problems: not everyone knows how to install blinds on plastic windows. In this article we will try to understand this in detail.
Species
To create coziness, there are more than 10 types of blinds: vertical and horizontal, roller and pleated, attic and interframe, for arches and bay windows, Roman blinds and multi-textured, electric and protective (roller blinds), photo blinds.
Blinds can be wooden, bamboo, metal (aluminium), fabric, plastic, paper.
Ease of use, reliability in operation, affordable price, light-protective properties have led to the fact that horizontal blinds have become one of the most popular types. They are used in the design of windows and other openings (in the most different rooms). But most often they are used for windows, and in modern world– for plastic options.
Installation features of cassette models
If the owner installs the blinds himself, the manufacturer often refuses warranty obligations. There are quite understandable explanations: due to incorrect installation, the shutters may simply not work, which means that the curtains will be unsuitable for use. In addition, if installed incorrectly, the glass itself and/or the frame can be damaged.
If you are not sure about own strength, then it’s better to contact a specialist.
If you decide to do everything yourself, firstly, you need to determine the methods of fastening. Secondly (depending on the chosen method) – purchase blinds. Thirdly, it is necessary to prepare tools and materials.
Mounting methods
There are several mounting methods (depending on the window opening):
- If window opening need to be visually enlarged, then the cassette can be attached to the wall above the opening. The block itself can be much wider than the window opening, and the height of the structure can be much higher than the frame itself. By appearance these can be full curtains;
- If the window opening is wide enough, the window sill is used as an additional (for example, flower) shelf, then in this case the cassette can be attached to the upper slope of the opening - similar to installation on the ceiling. In this case, the window will visually look larger, and on the windowsill, by closing the blinds, you can hide important objects from prying eyes. In addition, with this mounting, the flowers will not be in eternal shade;
- If the window itself is large enough and does not require visual magnification (or the window sill is narrow), then the blinds can be attached to a fixed window frame, to an opening sash, to glazing.
Required materials
Having decided on the method of fastening, you should next prepare necessary tools, among which:
- Roulette. Its length should be sufficient to measure the width and height of the window opening in one step. If you independently report the dimensions of future blinds to the manufacturer, you need to take measurements based on the chosen mounting method. If the cassette will be mounted on the frame itself, then the width of the lamellas (plates) should be 2-3 cm less than it. Otherwise, the blades of individual cassettes will interfere with each other. If you still make a mistake with the dimensions, then keep in mind that even metal lamellas (plates) can be carefully trimmed with ordinary scissors on both sides - to maintain symmetry;
- Marker or pencil for marking;
- Phillips screwdrivers and (or) screwdriver;
- Drill or hammer drill - for attaching to a wall or ceiling;
- Dowels, screws and brackets;
- PVA glue or liquid nails - in case the hole is larger than the dowel and needs to be more securely fixed in the wall or ceiling;
- Pliers;
- Hammer;
- Plumb line (for example, from a thread and a bolt);
- A level that helps to position the structure correctly;
- Stepladder or work table (chair).
So, the blinds are ready and unpacked. Everything you need is also prepared. It's time to start strengthening by considering various ways fastenings
How to hang it on the wall correctly?
When planning to make markings for the brackets on the wall, you need to assemble the blinds, following the instructions:
- At a distance of approximately 15 cm from the edges of the product, you need to mark the places for fastenings. Do this using a tape measure and a level.
- The bracket should not be located at the location where the clamp is attached or at the location of the control system, otherwise it will interfere with the operation of the blinds. The distance between the brackets should be no more than 60 cm. As a rule, the width of the cassette block does not exceed 2.2 m. If the window is large, then several panels of blinds are made. The rule remains the same in any case: the wider the block, the more brackets will be required for secure fastening.
- After installing the brackets, you need to push the latch forward. Carefully (slightly tilting it towards the wall) insert the upper cornice under the bracket latch, press it firmly against the wall and turn the latch all the way to the left by 90 degrees.
- The lamellas are rotated to the “open-closed” position using the control knob included in the kit. The length of the handle should not exceed 2/3 of the length of the blade. If the handle is longer, then you need to remove it from the frame, open the protective cap, saw off the excess length, put the cap back on and hang it on the frame.
How to attach it to the ceiling yourself?
The principle of attaching a cassette model to the ceiling or the upper slope of a window opening is the same as when attaching it to a wall. Differences will be observed in the way the brackets are installed. When installing the bracket to a wall, horizontal holes are used, and when attaching to the ceiling or upper slope, vertical holes are used.
The technology is as follows:
- Using a tape measure, determine the center of the window opening and make markings symmetrically (relative to the center). When you are going to attach the brackets, attach the cassette with the blinds and check how they work: whether the canvases interfere with each other and the free movement of the cords, or if they touch the opening.
- Then connect the marks and check the levelness with a level. Using a drill or hammer drill, drill holes: for a self-tapping screw with a 2.5 mm drill, for a dowel - depending on the plastic part.
- When planning to fasten the brackets, check again with a level that the cassette is positioned correctly. All that remains is to fix the brackets, fasten the cornice by turning the latch to the left 90 degrees and insert the plugs. If you attached the cornice with the canvas, this means that the job is done. If not, then all that remains is to attach the canvas.
Sash mounting
The cassette unit can be attached directly to the frame using self-tapping screws, violating the integrity of the window frame. But you can attach the blinds without drilling.
If you decide to use self-tapping screws, then their length should not exceed 10 mm, so as not to pierce window frame through and not to break the tightness of the window unit. After marking and attaching the brackets with self-tapping screws, you need to attach the blinds in the manner described earlier (insert the curtain rod, turn the latch to the left).
You can learn further about how to attach vertical aluminum blinds to a plastic window sash using drilling.
Install without drilling
If you decide to do without self-tapping screws and violating the integrity of the glass unit, then you can use double-sided tape or brackets - clamps. Moreover, you can attach the cassette with tape both to the frame itself and to the window sash. But brackets can only be used on sashes.
Using double-sided tape
Scotch tape should be used for construction work, not for paper. This type of tape is not sold in office supply stores. You need to look for it in building materials stores and auto stores.
There are two options for installing blinds with tape:
- glue the tape directly onto the cassette and glue it to the window (sash);
- Glue the clamp brackets to the tape, and then attach the cassettes to them.
In any case, when using tape as a material for attaching blinds, you must adhere to the following instructions:
- This type of work must be carried out in warm time years, the double-glazed window should not be cold or covered with condensation.
- It is necessary to wash the frame or glass, dry the mounting area and wipe it with acetone or solvent.
- Make markings using a pencil, cassette, level; in this case, the line must be strictly parallel to the window sill so that a skewed gap does not form below. If the window sill itself is located on a slope, then you need to focus on the level and plumb line, otherwise the slats (blind plates) will interfere with each other when closing. Their functionality will be impaired.
- Remove the protective film from the tape and carefully stick it strictly along the intended line.
- Attach the canvas if it was not attached initially.
Using bracket clamps
Bracket clamps are very convenient for window sashes. They produce several versions of such clamps (plastic and metal), but they are all very easy to use. You can use them according to the following simple instructions:
- When assembling the cornice, you need to fasten the canvas and assemble it. You can fasten the canvas at the end of the installation work.
- Try the clamp on the cornice and check the functionality of the block.
- Depending on specific model clamp - open the window sash and snap the clamp (upper edge of the window sash). You can first separate the cornice and clips, snap them onto the sash - and then attach the cornice to the clip.
- Some models of clamps are equipped with stops that need to be secured to the curtain rod.
- Install the clips with magnets on the bottom of the window sash.
- Fasten the canvas if you have not done so before.
- Attach magnets to the bottom strip of the blind block and the clamps on the sash.
How to remove blinds?
Since there are quite a lot of models of blind cassettes, there are also many ways to remove them.
If your blinds are mounted on twist brackets, they can be removed by turning the latch to the right 90 degrees, while holding them. After turning, the cornice weakens; its upper edge needs to be slightly tilted towards the wall. The cassette comes out of the slots, the blinds are removed. Depending on the purpose for which you are removing the blinds, the canvas can be pre-assembled or left unraveled.
If the blinds are made in the form of a full-fledged curtain rod, then you need to very carefully (but with a little force) remove the top decorative strip. Below it is the curtain mechanism. Gather the canvas from bottom to top. Lift the blinds up and to the right, removing them from their grooves.
From the video below you can learn how to independently remove horizontal blinds from removable latches-fasteners.
When there is a lot of light entering the room, it is great, but sometimes there is too much light, it interferes with work or relaxation. Attaching blinds, which can be vertical, horizontal, or roller, will help correct the situation. You can install them yourself or seek the help of professionals.
Installation of products is carried out to the wall, ceiling or directly into the opening. When purchasing blinds, you need to remember some rules.
- First of all, you need to determine the exact parameters of the window - width and height.
- Decide where the control system will be located.
- Find out the optimal type of fastenings for blinds.
Vertical models are usually mounted above the window opening and can serve as curtains. Horizontal and roller ones have more possibilities - they are mounted on the upper slope, on the window, on each sash separately. At the same time, they combine perfectly with any curtains and leave the window sill free. Everyone must determine the product and installation options that are suitable for themselves.
It is best to order blinds from the same company that manufactured the windows.
The standard product set usually includes detailed instructions, telling you how to install it yourself.
Installation methods
Attaching blinds to plastic windows directly depends on the design and functional purpose. Horizontal or rolled products that cover only the glass are attached directly to the frame. In this case, they can function simultaneously or independently of each other. To install vertical blinds a bracket must be attached to the ceiling.
The opening flap does not require drilling, since the brackets can be installed using special clamps or double-sided tape. The most reliable and durable installation method is screws, which are screwed in using a screwdriver. It is imperative to take into account that the walls in many rooms are uneven, so determining how to install fasteners for blinds is one of the main factors in the successful completion of the process.
Related article: Methods and options for fastening sinks
For high-quality installation, you need brackets or brackets, which are usually included in the kit, as well as tools: a Phillips screwdriver, hammer, drill or hammer drill, plumb line, drills, tape measure.
Installation of blinds on brackets is carried out according to a certain algorithm.
- Make markings at the intended installation location.
- Hang the blind mount in a certain place: to the ceiling, sash, wall.
- Turn the mechanism latches all the way counterclockwise, insert the curtain rod, and return the latches to their original position.
Installation of blinds on non-standard openings using drilling occurs differently.
- Brackets are installed at the top of the frame, and plastic corners are installed at the bottom.
- It is necessary to secure the cables in special bushings of the upper cornice.
- Secure the cornice to the brackets.
- Pass the cable through the holes in the slats.
- Another pair of bushings must be inserted into the holes in the lower brackets, thread the cable through them and secure.
- Attach the handle to the structure.
- Check system functionality.
Installation of fastenings for blinds on inclined windows using screws is carried out in a similar way using drilling.
How to determine the size of blinds?
When installing blinds on large openings, it is imperative to use intermediate elements, which will significantly increase the reliability of the structure. One bracket must be placed next to the control mechanism, since this area is most subject to load. However, it must be taken into account that it should not interfere with the normal functioning of the system.
The width of the blinds installed on the shutters and opening with them must correspond to the parameters of the window plus three centimeters - one and a half on each side. Installation inside the opening involves a canvas four centimeters smaller than the width of the window - two centimeters on each side. For free functioning, a gap is required between the canvas and the upper edge of the opening.
Installation outside the window opening requires the use of a canvas that is ten centimeters larger than the width of the window - five on each side. The length is not less than the height of the window plus ten centimeters. If the window handle protrudes, the blinds are mounted on brackets. In this case, the canvas should be 20 centimeters larger than the width of the opening, which will darken the room more effectively.
Before installing fastenings for blinds, it is necessary to check whether the selected design will not interfere with the normal functioning of the shutters.
Vertical models are mainly attached to the ceiling. They consist of a cornice with a control mechanism and slats made of different materials: plastic, fabric, wood. After installing the cornice, it is necessary to attach the slats, and you must ensure that the seams on the plates are on the inside when the blinds are closed. After installing all the strips, it is necessary to attach the cord that activates the control mechanism, and to prevent it from getting tangled, a special plumb line included in the kit is put on it - it can be of any shape.
Related article: Standard and optimal sizes of doorways
The lamellas are easy to cut, so in case of errors in the calculation, the position can be easily corrected using simple tools. Modern manufacturers We do everything possible to reduce the complexity of the process as much as possible. The main thing is to hang the stripes correctly, since all windows have different parameters.
Sectional diagram of the design of horizontal blinds
How to choose?
Due to the simplicity of the design, blinds can be manufactured very quickly, and a variety of mounting methods - with or without drilling - allows them to be installed on windows with both rotary and tilting modes of operation. Now it is not at all necessary to drill the frame, and in case of dismantling there will be no unattractive holes left.
Modern manufacturers offer completely new installation methods:
- holding magnets that allow the leaf to be positioned parallel to the sash;
- double-sided tape;
- brackets or clamps that are attached to the sash.
Before installing the blinds, it is necessary to check the tightness of the window and make sure that there are no drafts that will rock the structure and interfere with its operation.
The installation method depends on the design and size of the product. When choosing a model, you must take into account the functional purpose of the room. During work, you must exercise maximum precision and care, and also determine for yourself the most suitable product, the method of its installation and operation. It is important to remember that all blinds have strict geometric shapes, therefore, even a slight distortion during installation will spoil the appearance and complicate the operation of the control mechanism.
Today, blinds are one of the most effective elements of decorating the interior space of a room. They gracefully regulate the flow of sunlight, and ease of operation, affordable cost, variety of models and materials used for production have allowed them to remain relevant for decades.
Another factor influencing popularity is easy maintenance, which consists of periodically wiping the slats with a sponge soaked in a soap solution. Once a year, the strips should be removed, each one rolled up and placed in water with detergent– the dirt will come off without any additional action. After rinsing, they are hung wet in a place where they will straighten out on their own. Selected species Blinds can only be dry cleaned with a vacuum cleaner.
Windows in the house are the main source of light. A room with warm summer rays always lifts the mood, but what to do if this light overheats and creates the feeling of a stuffy room. To prevent this and slightly limit the amount of light entering your home, there is a huge selection of different curtains, curtains or blinds. One of the most common types of blinds is vertical.
They can be used both in office space and at home. The first question that arises when purchasing such blinds is how to assemble vertical blinds and hang them?
In fact, there is nothing difficult about this and anyone can do it.
These blinds are common and have many good characteristics. With their help, you can visually expand the space of the room and increase the height of the ceilings, and this is very convenient for small rooms. They also have the great advantage that they can be placed on openings of absolutely any shape - oblique, arched, curved or round. The cornice can be not only straight.
You will be surprised by the variety of shapes, shades, color range and textures of vertical blinds. In addition, they can be made to order according to your individual preferences.
They are very easy to maintain and do not require careful care. They are quick and easy to assemble and disassemble. They will be wonderful decorative elements your interior, transmitting scattering rays and preventing the penetration of too bright light. They are also easy to operate, they are mobile, simple and practical.
Design
In the manufacture of blinds we use various materials, such as plastic, fabric, wood, bamboo.
The design of the blinds includes the following parts:
Instructions for assembling vertical blinds
To assemble the blinds, you will need to stock up on a screwdriver, a drill with, a tape measure, a stepladder, a screwdriver and fasteners.
In addition, you should decide how the slats will move along the cornice.
There are several ways:
- The extension of the lamellas occurs from managed element, pushing towards the element;
- Extension of the slats towards the control element when they are on different sides;
- Extension of lamellas from the center on both sides;
- Collect towards the center of the product.
You can choose the option that suits you best and suits you best.
How to hang vertical blinds on a window
There may also be several options for attaching the cornice:
- on the wall;
- on ;
- on the window frame.
Note: Runners are special devices for hanging slats on a cornice.
First you need to outline the desired height. For more accurate measurements, use a building level. Using a tape measure, you need to find the middle point where the cornice and window are combined to determine the place to which the cornice will be located. For a 2-meter cornice, two brackets will be sufficient, and if it is larger, then at least three should be made.
The fasteners must move away from the walls to prevent the lamellas from tightly fitting to the battery, otherwise yellowness may appear on the lamellas.
Attach brackets to the designated locations to measure the required hole, and then use a screwdriver or screwdriver to secure them. The holes are drilled about seven centimeters deep, and dowels are driven into them.
The cornice is installed using special bracket clips, with which the profile simply snaps into place.
Important: You need to carefully approach a straight horizontal line, and also ensure that the distances from the window are the same.
A weighting agent is installed on the bottom of each lamella and the sheets are fastened with a chain. The operation of the device is checked by rotating and sliding the blinds with the control element. All installation work is completed.
Operation
Blinds need proper care. There are a few do's and don'ts to prevent unwanted life reduction and breakdown.
If there are animals or children in the house, you need to make sure that the blinds are not pulled. Damage to the mechanism is possible if the blinds are frequently opened and moved. Children can play around in this way, so it is better to place the control element out of the reach of children.
Over time, the blinds will get dirty and gather dust. Blinds made of plastic, aluminum or wood can be wiped with a damp cloth, and canvases made from the material can be washed by disassembling the structure first.
Hello, dear readers! Today we will talk about the correct installation of roller blinds on plastic windows. Modern systems, protecting the room from sunlight, are functional, elegant in appearance, easy to use, and their installation is so simple that even a housewife can handle it.
To install roller blinds we will need:
- roulette;
- pencil;
- building level and long wooden plank;
- a hacksaw, scissors or a stationery knife (if you need to cut the curtains to width).
If you decide to install a structure with drilling, additionally stock up on:
- electric drill with a 6 mm drill + dowels (for walls or ceilings) or 2.5 mm for wood (for a window system);
- Phillips screwdriver or screwdriver.
To install roller blinds without drilling, you need to additionally prepare:
- solvent for degreasing the surface;
- double-sided tape (if it is not included);
- construction adhesive (for more reliable fixation of elements).
Preparatory stage
Before purchasing curtains, choose the principle of their installation. The canvas can completely cover the window opening - in this case, the structure is attached to the wall above the window or the ceiling. If upper part The frame is wide enough, you can install a roller blind on it, but in this case, with the curtains closed, it will not be possible to open the window for ventilation. There are also roller blinds that are mounted directly on the sash and do not interfere with opening the windows.
If you have chosen curtains attached to the sash, use a level to check that the window is installed vertically. On strictly vertical window systems, installation of roller blinds with a free edge is allowed - there will be no gaps between the canvas and the frame that allow light to pass through. In other cases, it is recommended to use roller blinds with curtain guides.
According to your choice, take measurements using a tape measure. If there are no curtains of a suitable width on sale, buy wider ones - the excess can be easily cut off. Use a hacksaw to trim the pipe on which the fabric is wound and the wooden bottom strip.
To calculate the length of the shaft when cutting curtains, measure the required width of the curtain and subtract 8 mm from the resulting value (2x4 mm is the width of the two brackets). Cut the strip to the required width of the curtain. Applying the cut strip to the edge of the fully unfolded canvas, mark and cut off the excess material along the entire length with scissors or a sharp knife.
The width of the curtain fabric for the sash with guides should correspond to the width of the double-glazed window, plus 3 cm. The curtain with a free edge is slightly wider, since it should overlap part of the frame. At the same time, it should not cling to the handle on the fold.
If you plan to attach a roller blind to the ceiling or wall above a window, first make sure that the finish will not be damaged when drilling the holes.
Drilling installation
Choose which side is more convenient to position the control chain, since the bracket for installing the control mechanism has a special configuration.
Then mark on the frame, wall, window opening or ceiling where the bracket for the control mechanism will be installed. In accordance with the marks, drill holes for its fasteners. Install the bracket without fully screwing in the screws.
To determine where to install the brackets on the wall or ceiling, determine the central axis of the window opening, set equal pieces to the right and left of it.
Insert a mechanism with a chain on one side and a plastic tip on the other into the ends of the shaft. Install the mechanism in the bracket and, using a building level and a wooden plank, level it horizontally, accurately determining the installation location of the second bracket.
Drill holes for the second bracket, secure both load-bearing structural elements. Insert the shaft with the pre-fixed curtain into the brackets - first the end with the mechanism, then with the plug.
To secure the curtain to the shaft, you need to bend its top edge by 5 cm, forming a fold. The roller with the self-adhesive strip, from which the protective film has been removed, is installed in the fold with the adhesive part facing up, and then rolled towards the top edge. It is important that the canvas adheres strictly horizontally to the shaft.
Then roll the fabric almost completely and insert the bar into the special slot on the bottom edge. Correctly install the mechanism into the shaft - the blade should be located close to the window.
Installation without drilling
The principle of assembling a roller blind and installing it remains the same. The difference concerns only the features of fastening the brackets - they can be glued to the sash or fixed on its upper edge using special hooks.
Fasteners with a hook are used if the sash with a seal has a suitable thickness. In this case, the bracket is assembled from parts according to the manufacturer's instructions and installed on the upper edge of the open sash according to preliminary markings. Then the roller blind shaft is inserted into the brackets. Make sure that the door with hook brackets closes properly.
Brackets equipped with an adhesive layer are attached to the surface of the sash. To make the fixation as reliable as possible, be sure to degrease the installation site. Additionally, a suitable construction adhesive can be used.
The guides are also equipped with an adhesive layer - remove the protective film from it and attach the bar to a grease-free surface, inserting the upper edge into a special groove in the bracket.
At the end of the installation of the roller blind, limiters are installed on the chain with which the curtain is raised and lowered - small plastic washers with a slot. The first limiter is installed on the chain when the lower edge is raised to the required height, the second - when the curtain is completely lowered.
Video on the topic “how to attach roller blinds to plastic windows”:
Blinds have won respect for their simplicity and convenience. They are durable and can remain on windows for a long time without causing irritation to residents.
Blinds are a practical and convenient option for window decoration.
Variety of designs and color solutions The product market is simply huge.
How to hang roller blinds on plastic windows
But the price is not always affordable for the buyer. And sometimes you just want to see things around you that you created with your own hands. In both cases, the solution is this: make the blinds yourself. Moreover, it can turn out beautiful, unusual and inexpensive.
What materials and tools will be required?
Assembly diagram for vertical blinds.
To make blinds with your own hands, you will need a small set of tools and materials:
Where to start?
Scheme for attaching blinds to a window.
It will be easier to make vertical blinds, so we will focus on describing their technology.
We select the roll of paper so that it is 2 cm narrower than the width of the window opening. We measure 3 cm from the bottom cut and bend the sheet. You have to fold a length of paper equal to the height of the window with an accordion. Place the accordion under a press for 2-3 hours.
Now you need to find the middle of the folded paper. You need to make through punctures in both directions from the middle at a distance of 3 cm. An awl is quite suitable for this purpose. The paper is attached to this rail with tape or simply glued.
How to assemble the structure?
Scheme of vertical blinds with an inclined system.
Vertical blinds are already ready, you just need to assemble them and correct location on the window.
First, glue the bottom of the folded paper in the center with tape. The thread is threaded through the hole from bottom to top, then turned around and threaded in the opposite direction. One end of the thread is equipped with a bead.
A movable clamp must be placed at the second end. Usually a clothes clip is used, but it will not look very nice. It is better to have complete symmetry, so it is recommended to drape these parts equally.
Here you can use various drapery schemes small parts(bells will look very nice and will hide the clips).
To prevent the thread from quickly wearing out when rubbing against wooden slats, it is recommended to place a roller in the central part of the rack.
Now the vertical blinds should be placed on the window. Gravity will cause the paper to fall. This will be the extreme position for the stationary bead. The movable clamp is located at the same height.
We tie knots under the marked parts and cut off the ends of the thread.
How to test mobility
We fixed the clamp and obtained the required position.
The bottom edges of vertical blinds will sag. To eliminate this small flaw, you can equip the lower part of the blinds with a thin plate of any material, gluing it with double-sided tape.
For lovers of more refined interior elements, it is recommended to use your imagination. It will look very attractive if you bring both lower edges together and fasten them with glue or the same tape. The result will resemble a heart. Why not an option for lovers?
Where can you use homemade blinds and how to repair them?
Installation of vertical blinds.
It is clear that DIY blinds are made for use for a short period of time.
This is usually done before repairs begin. This way you can regulate the amount of light entering the apartment and save finishing materials from burnout.
Homemade blinds are suitable not only during renovations. They can be considered as an excellent alternative to factory products in country houses, garages and utility rooms. Homemade vertical blinds are used seasonally: in the summer they prevent light from entering the apartment, which helps escape the heat.
Repairing homemade vertical blinds is also easy.
It consists of replacing the paper (you will have to make a new accordion). When assembling a new product, the same procedure is followed.
Movement diagram of vertical blinds.
Do-it-yourself blinds do not have to be made from paper.
Home craftsmen advise using regular starched fabric for this. This makes sense: the material is thinner, and an accordion can be easily made using an iron. The fabric can be easily removed and washed, which makes vertical blinds more durable.
You can experiment with the lower part, giving the product completeness at your discretion.
But when using fabric for vertical blinds, you need to make the lower part of the product a little heavier. Typically, for this purpose, the bottom edge of the fabric is folded in half and stitched at a distance of about 5 mm from the bend. Subsequently, a metal (aluminum) wire is inserted into this hole. It will weigh down the blinds and keep their bottom edge horizontal.
This can be avoided if the edges of the holes are sealed with tape or treated with metal rivets with holes.
You can sew the holes with regular thread. The edges of the holes will be stronger, which will make handmade vertical blinds even more durable.
Repair of factory-made vertical blinds can be done according to the same rules as described for homemade ones. But replacing a certain part of such blinds will be visible even to the naked eye. It will not be possible to hide a defect, since it is very difficult to choose a material of a certain color scheme. But there is no need to do this: it is enough to replace several elements at once during the repair.
It will turn out very beautiful and elegant. It will look as if blinds and curtains were specially combined.
Review How to assemble vertical blinds with your own hands.
Making a DIY blind roll is a task that every home owner can do.
Planar weighing scheme.
The lifting mechanism used in this embodiment is designed as a shaft, raising or lowering the curtains due to its rotation.
DIY curtains like this - simple task, and it's fun to perform, you need to buy necessary materials and tools.
Using roller structures with a lifting mechanism in every room can transform it without recognizing it and can solve a wide range of design solutions.
But while installing curtains, you must consider all the shades as both of you can make the design look elegant and completely ruin the design idea.
Blinds or shutters are located directly on the frame or in the window, although they seem simple, they are no less interesting than expensive curtains or lambrequins.
Roller structures have a convenient lifting mechanism, so they have found their application in both offices and apartments.
Benefits of blinds
These elements are equipped with a convenient lifting mechanism; you can use them independently or together with other window design elements.
This design can be installed on plastic and wooden windows. Close the window and take care of them.
This design has a simple lifting mechanism, so it fails when using such curtains.
After correct installation they allow you to completely turn off the room, and there is a wide choice of colors.
Some people replace pilgrims and blinds.
They are similar in appearance, but Roman blinds consist of a cable system and the blinds have a lift mechanism that rotates and is located at the top of the structure.
Types and Types of Blinds
The shaft design can be open or closed, electric motor can be used to easily control shades.
Rolling structures can be with or without cassettes, lofts or blinds.
The control principle can be set manually using a chain or electric drive.
How to hang blinds on plastic and wooden windows by hand
There are such models, and for the material used there may be different types fabrics.
Characteristics of creating self-rolls
Let's look at an example of creating such a shape with your own hands, while the roll is at the bottom and the canvas is attached at the desired height using strips.
First measure the windows where this curtain is attached.
The width of the fabric should be 2-4 cm larger than the given size, and the length should be greater than 5-15 cm. Depending on which room you will install this design in, choose the fabric and pattern.
To work you will need:
- two pieces of fabric of the required size;
- ribbons to be used as covers should be twice as long as the curtains + 30 cm;
- a wooden bracket or hose for fastening, their width should be 1 cm less than the width of the curtain, you can buy a ready-made cassette system;
- stick or weight rod;
- screwdriver and screws;
- stapler;
- thread, needle.
Work order
Fold the two pieces of fabric on the wrong side and stitch on three sides, then wring out the bag.
Now you have to insert the weight, or you can make a special pocket for it.
The fabric is hungry and kept on a wooden stick, if a hose is used, the fabric hangs around it and the seams.
The posts fold in half and are also attached to the rod using clamps. After this, we fix the beam on the window frame.
Above we cannot do this job.
If you plan to remove the curtain, you can attach it to special hooks. To attach to a plastic window, you must use double-sided adhesive tape. Creating rolled structures is a fun process, you don't need to have any specific knowledge or materials, so you'll end up with a beautiful window.
WINDOW MAINTENANCE
Place curtains on the window panes and it won't be as much. However, this requires specially designed curtains along with the appropriate accessories. Such curtains are attached directly to the sheet and rotate with it. They are equipped with a spring-loaded lifting mechanism and are secured in position by a locking hook.
Spring spring accessories are the flat part attached to the side of the frame.
In the curtain of the curved curtain slit, insert a wooden rod with a circular cross-section that snaps into place with locking hooks attached to the sides of the frame.
Shimmering curtains of different tones and patterns are made in a special capacity for sleeping windows.
ROLE OF PROTECTION
BY WIDTH
When installing curtains in niche windows, they may need to be fixed to the width.
To do this, unscrew the fabric and cut off the metal shaft with the correct nut. Then draw a line with a pencil on the fabric that limits the desired width and cut it with scissors along that line. Replace the fabric on the shaft and install a narrow curtain.
COMPONENTS AND SPECIAL SIZE TYPES
The darker the curtains, the less light they transmit.
They are completely opaque among them.
Blinds on plastic windows
The fabrics of such curtains can be of different colors and with different patterns.
Curtains in a special design can reach a width of 300 cm and a height of 240 cm. Intermediate sizes are also possible.
Roller blinds can be equipped with lambrequins of various shapes, such as the last elements of the curtain. Lambrequins come in a variety of colors and can be mistaken for tons of curtains.
The set of blinds includes supports with which they are attached to the wall, ceiling or side windows of the window niche.
The blind can be easily removed from the brackets for cleaning.
7 The range of colors and patterns of decorative fabrics for blinds is very diverse - you can choose a fabric to suit every taste.
2 If the edge of the curtain does not fit, you can decorate it with a cap. Here are lambrequins of three different shapes.
3 Universal plastic brackets that can be attached to vertical and horizontal surfaces.
4 Brackets for attaching rollers to plastic windows.
They are mounted on the frame and screwed in.
How to properly hang curtains on a plastic window
If you want to close the shutter window, you don't only need a curtain, but also go with guides. If you understand the installation nuances, install blinds on plastic windows without the help of experts.
Types of blinds
Drive systems are classified according to several parameters: design type, steering mechanism and production material.
On the first sign, all curtain models are divided into two groups:
Open - the box is not closed by the box, which makes the curtain less compressed against the glass, and the mechanism is not protected from external influences;
Closed - There is a safety cabinet which increases the cost of the system but provides better performance.
In addition, the system can have different geometric parameters: the shape of the guides, the diameter of the shaft, the width of the belt.
The choice of size depends on the surface of the hole, so you need to know how to measure a plastic window before ordering blinds.
To manage the system you can use the following mechanisms:
Plastic chain or chain, for example from blinds;
spring lock - automatically holds the blade when you unload it to the desired length;
electric drive - the shaft is equipped with a low-power electric motor that can be remotely controlled.
Each option has its own purpose.
Thus, a spring is better suited if the curtains do not need to be adjusted frequently, and an electric drive is better if the system is not available. In most cases, twine is sufficient.
The fabric of the blinds is made of durable materials that do not stick to glass - polyester, cotton, nylon, coated bamboo and metal inserts.
They can provide different air permeability of the curtain; The following blinds are allocated with this feature:
Transparent - diffused sunlight used for decorative purposes;
smoke - partially transmits visible light, but blocks heat;
Fatigue - completely blocks light;
Day-Night - Alternating transparent and opaque sashes that allow you to let in and block light without collapsing the canvas.
Regardless of whether the canvas is made, it should be cleaned regularly soap solution, especially if there are curtains in the kitchen.
Curtain installation device
Before you decide how to hang your curtains, you must choose the type of balloon mounting.
The most popular method and most suitable for large windows is wall or ceiling installation. The shaft must be screwed to the window opening, which creates many inconveniences - for example, a window with a curtain cannot open.
In addition, if this ends, it may get worse with such manipulations. In most cases, it is better to use a window aperture installation, since in this case the system can be mounted without drilling.
Next, you need to make sure that the window is completely vertical - you can use it flat or flat for this purpose. If there is deviation, the curtain will not fold properly and will not hold the glass well.
In this case, you must install it on a wall with a small recess from the frame or repair the window itself.
For a cylinder mounted on a wall or ceiling, add a hole 15 cm wide and 10 cm high;
When installing in a hole - remove N from the aperture width, measure the height as it is (N is equal to the size of the brackets depending on the system manufacturer).
The designated manufacturer may have their own design and measurement capabilities - this should be checked on the company website or in store.
Do-it-yourself prefabricated shutters on a plastic window
Once you've taken your measurements and purchased your system, you can figure out how to hang your blinds.
The easiest way to install them is with self-tapping screws. To do this you need to do the following:
1. Place the rails on the frame and tighten with the included fastener.
2. Insert the covers and gears into the shaft box or secure them to the shaft if the system is open.
3. Attach the shaft to the bracket by pinning it at the top and pressing it until it clicks into place.
4. Cover the edges of the box with decorative trim.
If you don't have a tool for tightening screws, you need to learn how to repair curtains without drilling.
To do this, you can use the Velcro that comes with the kit. Installation is performed as follows:
1. Velcro attachments are attached to the guides.
2. The window frame is degreased.
3. Velcro heats the hair dryer, then removes the protective film from it.
fourth
The system is assembled as described above.
Keep in mind that a curtain installed with Velcro will not hold as securely as one that is secured with screws - the fasteners may need to be replaced for a while.
But if you need to remove the roller blinds, they can be easily soldered in this case.
Installation of rolls on plastic windows from A to Z
In the case of self-tapping screws, the system must be unscrewed. After this, the shaft is separated from the guides and the network is removed.
It's therefore very easy to install the curtains - just follow the instructions carefully. If everything is done correctly, there will be no problems with system performance.
← Austrian curtains in the Egyptian style interior →
The procedure for attaching roller blinds to windows
Instructions for use of horizontal blinds
Rules for using horizontal blinds.
1. The lamellas rotate around their axis by turning the control rod.
2. Raising and lowering the canvas is carried out by a control rope. To raise the blinds, pull the rope down. To fix the blinds at the desired height, move the rope away from the center of the canvas and release.
To lower the blinds, pull the control cord toward the center, thereby releasing the cord lock, and release the cord while holding it lightly.
Raising and lowering must be done with the slats in a horizontal position. The lower cornice can be fixed at any level.
3. Horizontal blinds Installed only indoors with relative air humidity up to 70%.
4. Avoid mechanical impact on the blinds.
The slats can easily become deformed.
5. Horizontal aluminum blinds do not require special means care It will be enough to wash them regularly with a soft cloth or vacuum them with a brush with a soft attachment.
For washing it is recommended to use only cold or warm water(not boiling water or hot water!). If heavily soiled, the blinds can be removed and placed in a bath of warm soapy water. Be careful to leave the top cornice and control mechanism above the water. Rinse and dry the blinds thoroughly and let them air dry.
6. ATTENTION! Self-repair of the product by the customer is not permitted.