From plastic pipes with your own hands.

Organizers - convenient devices for storing small items

Even without any special skills, you can easily make such useful crafts from plastic pipes with your own hands. Even very short cuttings of different diameters will be used. To work you will need a sharp knife and glue.

The drawing shows how to cut off one edge of pieces of pipes in order to then make a convenient organizer for writing things or bathroom accessories. It is only important to try to ensure that the angles are the same everywhere.

Then the workpieces are cut into a flat surface: a stand or a wall. If desired, you can paint the organizers or put a design or ornament on them. Or you can even paste photographs of the most pleasant moments of life.

Using this algorithm, you can make other crafts from plastic pipes with your own hands: a creative shoe rack, a sock holder, a wine rack. And if the cuts are made strictly horizontally, you will get beautiful flowerpots or flower vases.

Designer find - a chair made from scraps of propylene pipes

A good owner will never lose anything. With a reasonable approach, every little thing will go into action, and through the efforts of a patient craftsman, amazing crafts from plastic pipes can be obtained. You can easily make a luxurious chair with your own hands using the same knife and glue.

In this case, pipe sections are cut to arbitrary lengths in large quantities. It is only important to maintain the same dimensions of the longest supporting pieces.

Then the segments are glued along their length. The longest supporting pieces should be located at the same distance from each other. For the armrests, the sections are prepared higher than those that make up the seat. And for the back you will need even longer ones.

All that's left to do is sew it beautiful pillows and fill them with padding polyester or cover the foam rubber parts of upholstered furniture with fabric.

Stool made from scraps of polypropylene pipes

They say that the goal is cunning in invention. This is the absolute truth! Only a frugal person can invent something similar - create amazing crafts from poly propylene pipes, remaining after repair or construction, that is, practically from garbage. This means that, with his wise approach to life, he will never be naked.

For a stylish stool you will need thin pieces of pipe of different lengths. Before work, you should make paper patterns according to the drawings. Pipes with asymmetrical bevels on both sides are cut along them and glued together along their length. The last trim is the support one, it will serve as a leg. Therefore, it is the longest and has a horizontal lower cut.

When all four side parts are assembled, they are held together with corner trims. The bottom is assembled from short pieces with a horizontal cut at the top. The stool can be painted any color, or it can be left white - it all depends on the preferences of the master.

Fencing a flower bed or sandbox

Using the same algorithm as chairs and stools are made, you can build other necessary things. It will be practically

Plastic pipes make excellent original fencing for summer cottage or in the yard country house. Moreover, you can use even the shortest cuttings of various lengths and thicknesses. They are fastened together along the length in the form of a miniature fence and dug around a flower bed or sandbox

You can use glue to make such a creative fence. It will be even more interesting if the scraps are tied with wire, imitating a wattle fence.

Children's Corner

If you use your imagination, you can create interesting crafts from polypropylene pipes, which will delight your beloved children. Cool stands for laptops and easels, canopies over a crib and playhouse frames are easily assembled using fittings and tees.

You can strengthen the joints with additional glue, and cover the product with paint and varnish. You can also decorate the top of the craft with stickers or ornaments.

Greenhouse for a summer cottage

It is difficult to list all the DIY plastic crafts created by visionary craftsmen. But not to mention such a necessary and useful structure as a greenhouse is the height of imprudence.

To build, you need to fence off the designated area with boards or bricks and dig pins around the perimeter. Their diameter should be slightly smaller than the pipes used.

Now you can start designing. Therefore, the next step will be to secure the pipe sections on pins in the form of arches. To do this, first the ends of the pipes are put on the racks on both sides. Then you can additionally attach the pipe from below with a strip of tin to the perimeter of the fence.

You can add rigidity to the structure using several pipes, which should be placed perpendicular to the arches. The intersections are tied crosswise with wire or strong twine.

Now all that remains is to stretch the film over the structure - and the greenhouse is almost ready.

Coffee table with figured legs. Master Class

Crafts made from plastic pipes (PVC) are amazing design works. For example, the original one with a glass top and bent legs will become a real highlight of your home.

Of course, first of all, you should carefully think through, calculate and draw out all the details of the future model of crafts made from plastic pipes. It’s not difficult to make drawings with your own hands if the master has skills in this regard. Otherwise, you can use a ready-made one, which is offered here. Dimensions are taken arbitrarily.

The legs of this table are arched. To add rigidity to a pipe, you need to reinforce it. Strong wire is suitable for these purposes. The master draws out the life-size shape of one arch on his workbench and lays the first section of pipe with a rod inside. Then he gives the arch the desired shape. The same should be done with the second segment. Although you can use a cardboard template to give the desired shape.

Then the shape of the arch-holder on which the tabletop will lie is drawn on the table. It is also appropriate to use a template here. The holders are made according to the algorithm described above.

It is best to connect the legs to the tabletop holders using tees. For greater fixation, you can coat the joints with glue or cement. The structure, assembled from scraps of PVC pipes, is painted in desired color. The glass can be glued to the holders to prevent it from slipping. Although it would be quite appropriate in this model.

In general, you can make many other useful and beautiful things from pieces of polypropylene pipes, you just have to think carefully and apply your manual labor skills and diligence.

6378 0 0

Crafts from pipes: waste-free production and contribution to environmental conservation

One day my husband locked himself in the workshop, and two hours later he came out with this design from the picture, proudly called the chair frame. As it turned out, the idea of ​​​​creating it was born to him in the process of designing a street and garden water supply system, but it turned out that he did not “reinvent the wheel”, since crafts from PVC pipes our craftsmen have mastered it a long time ago. As thousands of photographs on the Internet prove.

Nevertheless, this topic is very interesting because it opens up limitless scope for imagination and allows you to use even the most waste plastic pipe waste instead of throwing it in a landfill or burning it along with garbage, poisoning the air.

A few words about profitability

My husband bought the pipes, angles and couplings for this “throne” specially. To make the back and seat, you will also need boards and clips for fastening (they are planned to be removable). The price of all materials, including stain for impregnating the wood, was about 1,500 rubles.

Having gone the next day to Castorama, we found there garden chairs at a comparable or even lower cost. Conclusion: making plastic furniture, taking into account the time spent on it and the cost of raw materials, cannot be called a profitable business.

From an economic point of view, it only makes sense if you use pipes left over from the water supply system, which are still disposed of. Although I suspect that some things may turn out to be much cheaper than store bought ones.

For example, a greenhouse frame or a high chair for feeding. But here you will have to sacrifice functionality or aesthetics: it’s unlikely to be white plastic construction with clearly visible fittings will fit into stylish interior apartments. In addition, unlike factory products, it cannot be transformed into a cradle or swing.

If you yourself or your work acquaintances are involved in the laying and installation of water pipes and or you have the opportunity to “obtain” pipe cuttings for free, then in this case it is worth trying to make crafts from plastic pipes with your own hands.

Of course, I am writing all this for those who want to save money on buying the necessary things. Those who cost finished product does not care, but is only interested in the creative and inventive component of the process, they can omit this information.
And one more nuance. In addition to the actual raw materials for crafts, tools and equipment are required to assemble them, which also need to be purchased.

• To weld polypropylene pipes, a special soldering iron is required, which some plumbers for some reason call an “iron”;

• Metal crafts from profile pipe impossible to produce without welding machine, electrodes and grinders;
• Only PVC pipes are connected using glue and do not require the purchase of expensive equipment. Yes, and in our case we don’t need to use glue. This is the most convenient material for the manufacture of collapsible structures, but the cost of the pipes themselves is quite high: they are at least 3-4 times more expensive than polypropylene pipes.

What can be made from pipes

Plastic pipes do not rot, do not corrode, and do not require painting, although it is quite possible to change the color of the product if desired. They are quite durable, smooth, easy to clean, and not afraid of water. In short, the ideal material for making... anything.

Metal round and profiled pipes are not far behind them. You need to tinker with them more (you need corrosion protection, experience with welding), but the things turn out to be more durable and reliable.

Let me give you a few examples.

Furniture

In addition to the chairs already mentioned, you can make benches, sun loungers, tables, shelving and even beds from pipes. And not only frames for them, but also full-fledged products.

Such furniture will fit perfectly into interiors decorated in modern styles hi-tech or loft, where maximum simplicity and even some roughness of designs are required. And for a dacha and garden this is just a godsend.

Gardening and household crafts

If in a city apartment products made from pipes often look alien, then in the courtyard of a country house they belong. Look how many necessary and useful things people do.

• Greenhouses and greenhouses. The design can be anything, like rectangular pitched roof, and arched - plastic pipes bend well over long sections. Unlike wood, they are not afraid of moisture and fungus, and are not harmed by insects.

• Vertical beds. They can be placed in the greenhouse itself, in the open air, or on the terrace of a country house. This method of growing plants saves space if the area is small and decorates the area.

• Gazebos and canopies. As well as playhouses for children, enclosures for dogs or poultry and other light yard buildings.

• Fencing. You can use short pieces of pipe to make borders for flower beds. And the long ones will be used to create a fence around the site, gates and gates. Agree, such a fence looks very interesting, and will last a long time.

• Garden and children's swings. When manufacturing them, you need to take into account the expected load and choose pipes with a diameter of at least 32 mm.

• Pergolas, arches, supports for climbing plants. Made from wood, they will rot over time, and the metal gets very hot in the sun, burning the plants. Plastic is an ideal material for these purposes.

This is not a complete list of what useful things can be made for a summer residence from plastic or thin-walled metal pipes. It can include garden carts, various sprinklers, clothes dryers, curtain rods, stairs, stepladders, etc.

How to use short trims

Even completely waste pipe sections a few centimeters long can be used. The main thing is to turn on your imagination. For example, if you cut them 1-2 cm thick and glue them together, you can get an excellent frame for a mirror, wall clock or photographs.

Men will like the following idea to keep their garage or workshop tidy:

And in the kitchen you can build a mini-bar using the same principle.

Conclusion

To describe everything creative ideas, already implemented by people who are not deprived of imagination and creativity, require a lot of time. Looking at these photos and videos in this article, I myself am itching to put into action what is left of my recently assembled garden irrigation system.

What do you think of this idea? Let's think together about what other useful and interesting things can be glued, soldered and welded from pipes instead of just throwing them in the trash. I look forward to your comments.

If you want to express gratitude, add a clarification or objection, or ask the author something - add a comment or say thank you!

You can make a variety of crafts and many useful things from the simplest and available material, for example, plastic pipes. They can be purchased in specialized stores. Many owners have them left after repairs and lie idle in the barn. Therefore, you can safely take them out and start creating. And from our article you will learn original ideas for crafts from pipes.

Plastic pipes for crafts: advantages

Plastic pipes make it possible to create excellent prefabricated and collapsible structures. They can be used in an apartment or in a country house. Crafts for children will also look great.

The advantages of this material are as follows:

• possibility of use without preliminary painting or with additional surface decoration;
• compactness of the created collapsible structures;
• non-toxic when heated;
• high strength and rigidity of parts;
• possibility of creating various designs using connecting elements - couplings and fittings.

Using simple material, you can create original products and delight your friends and loved ones with a gift.

Methods for fastening workpieces

If you are interested in the question of how to make an interesting craft with your own hands, then to give plastic products To obtain the desired shape, you should stock up on a certain set of tools. You will need a gas torch, metal saw or jigsaw. Homemade products can be solid, connected using adhesive and bolts, or dismountable.

Can be used to connect sockets with a seal. However, this requires a lot of time and effort, but the connection is unlikely to be sufficiently rigid.

If you still decide to use this method, the pipes must be cleaned of contamination at the future connection points. The edge of the pipe that will be inserted should be coated with lubricant. When the pipe enters completely into the socket, it must be pushed back a little. This will allow the structure to be disassembled in the future.

Using glue helps make the structure more durable. The parts are first sanded at the connection points, followed by thorough degreasing. Glue must be applied to both sides of the fastening - both internal and external. When joining, the pipe is inserted tightly until it stops, and then a quarter turn is made. After this, reliable bonding should be ensured by tightly fitting the parts.

The option with fastening with bolts will be very labor-intensive, as can be seen in the photo of crafts made from plastic pipes. The craftsman will need to mark the locations for drilling holes and use a drill in the work. There is no need to glue, and the connections will be very strong.

Products for home and apartment

To make wonderful accessories for your apartment, you don’t need detailed instructions for crafts made from plastic pipes. All you need is the ability to work with tools and imagination.

If you make many cuts of wide plastic pipes and then fasten them together, you can create convenient sections for shoes. The length of the blanks should correspond to the size of the shoes of your household members. Of course, you can make shelves with short crossbars so that the heel of the shoe hangs down.

But designs that match the dimensions of shoes and boots look more convenient. The cells can be secured with couplings with glue, self-tapping screws or bolts. Cells for storing wine bottles in a cellar are made using a similar principle.

By connecting plastic pipes vertically, you can create a good hanger. Pipes inserted into the tee will be used as clothing holders. And for rigidity of fastening, it is advisable to insert a wooden holder or a metal rod inside the vertical structure.

Wide-diameter pipes can be used in arranging colored flowerpots, and medium-sized pieces are suitable for vases. By covering such products with colorful pictures or photographs, you can decorate them perfectly. From short scraps they construct original lamps on the desktop or floor lamps.

If you fasten the parts with the end cut at an angle of 45 degrees to a wooden base attached to the wall, you will get stands for pens and pencils. By placing the cylinders vertically, you will create an excellent base for your tools. And, of course, a laptop stand secured with special fittings will look great.

In the bathroom, a piece of pipe with three outlets is suitable for use as a holder for a hair dryer. If you fix the cylinders on the cabinet door, you can insert other devices into them, for example, combs and curling irons.

There is also a place for these homemade samples in the kitchen, which you can learn about by studying the master class on crafts made from plastic pipes. Firstly, these are original containers for storing forks, spoons and knives. And secondly, the cylindrical part can be used as a holder for glasses. You just need to take a pipe with a length of 0.5 m and make a longitudinal cut through one side. You can insert the stems of glasses into it. And the pipe itself can be attached to the ceiling or hanging cabinet.

Products for children

There are also a variety of crafts made from plastic pipes for children. What can you offer to little family members:

• Spacious playpen.
• Children's swing in the yard.
• Lightweight and mobile sled.
• Goal for playing football.
• Frame for a spacious house.
• Summer shower at the dacha.
• Screen for theatrical productions.
• A fence for the baby's crib and a fence that restricts the baby's exit from the room.

Children will also be delighted to have an impromptu closet for storing toys. A compact table and chairs and plastic pipes will fit perfectly into the interior of a children's room. Children will be able to eat their own food or organize gatherings for the dolls.

Arrangement of the dacha

Crafts made from plastic pipes for the dacha and garden are also popular. A lightweight and mobile clothes dryer will fit into the country interior. In sunny weather, you can take it out into the garden, and when it starts to rain, you can bring it under the canopy. The frame for garden furniture will be durable.

You can make a comfortable chair or chaise longue and cover it with durable fabric. You can give the desired shape to blanks when making, for example, a chair, using gas burner. The pipe heats up and bends at the desired angle. Then it should be left to cool for a while.

You can decorate your terrace or gazebo with a variety of panels. The pipes must be cut into shallow rings, secured with glue and hung on the wall. Partitions are constructed in a similar way, making it possible to separate functional areas into country house or in the garden.

Gardening enthusiasts can create flowerpots or vertical beds. By installing a fence made of pipes and planting climbing plants near it, after a while you can get a hedge near your house.

If you connect the pipes together around the perimeter, you get a pen for pets. And the sewer pipes themselves act as excellent feeders, the construction of which does not require much time.

There are other options for using plastic blanks:

• construction of a light gazebo;
• arrangement of a carport;
• installation of bicycle holders.

Taking advantage of the most simple material– with plastic pipes, you can create convenient, very useful items and accessories for your home and garden. Such homemade products will delight both adults and children.

Today we will share with you yet another useful ideas for country crafts made from ordinary plastic pipes, the remains of which from the time of the advent of country water supply are probably gathering dust somewhere in the attic.

In any case, the price of the issue here is simply incommensurate with the opportunities and inspiration that these affordable miracles of plumbing will give you.

Let's start, perhaps, with utilitarian structures intended for the garden and vegetable garden.Greenhouses, greenhouses and lightweight frames in beds for covering plants, assembled from polypropylene pipes and connecting elements - a very budget option that combines low cost and ease of assembly. If necessary, they can also be easily dismantled.

In addition to the theme - strong and stable racks for growing and working with seedlings. PVC pipes of a larger diameter, carefully cut out on top with a jigsaw and filled with soil are a compact and aesthetic option for planting greenery.

Crafts made from plastic pipes in the style of vertical gardening on a terrace or decorating a flower garden confirm that everything ingenious is simple!

What can we say about organizing a portable system? drip irrigation, indispensable for lawn irrigation or a mobile design for a watering hose. All the advantages are obvious!

No less in demand in dacha farming are such little things as a woodshed, a garden cart, a gate or a stand for spinning rods. Admit it, this never even occurred to you?

For organized storage gardening tools and tools - a few more useful ideas that just beg to be implemented immediately.

Pipe sections attached to a wooden plank can serve as pencil holders. And vertically located cylinders can serve as a supply for tools. To prevent tools from falling down, the bottom of the pipes can be foamed with foam.

Yes, we almost forgot about parking for bicycles and scooters in case guests arrive. Plastic pipes came in handy here too!

At the dacha it is customary not only to work, but also to indulge in idleness. Simple designs of garden furniture, assembled from polypropylene pipes, will help you pleasantly relax and unwind in a shady corner of the garden.

Do you want a chair like this for kids made from PVC pipes? This is completely within our power!

You will need for the frame (I write in inches so as not to adjust, anyone who needs it will translate it, I would just use an inch ruler):
8 elbow pieces
6 T-pieces
1 PVC pipe (choose good quality, strong) cut into 16 pieces:
7 pieces by 10 inches
2 pieces per 6 inches
4 pieces by 4 inches
4 pieces by 5 inches.
For the seat:
fabric measures 29.5" x 17.5" with 1/2" center seam.

Sew along the long side. The seam is turned to the middle of the back side, but this is at your discretion.

The short sides are sewn together, leaving a hole for turning.

The short sides are turned over 3 inches and stitched.

To cut the pipe, you will need special scissors or a hacksaw/saw, and preferably a strong man with the necessary skills.

The cut parts are assembled according to this scheme.

Can be painted, but after painting it was difficult to assemble, the thickness of the pipe changed, so worth painting after assembly .
They say that 100% acetone will erase the writing on the pipe.

For example, how do you like comfortable chair models? Choose to suit every taste!

How do you like a comfortable garden swing?

A comfortable sun lounger, an impromptu canopy for a morning meal in the fresh air, or this model of a stand in the spirit of a “life hack” that allows you to train on a treadmill without leaving the Internet? Cheap, reliable and practical!

At the dacha you always need reliable shelves

Children in the country are a separate topic of concern. The ubiquitous children must be given the opportunity to play and misbehave in such conditions that parents can be calm.

For kids, you can assemble such a comfortable playpen or a cozy toy house right at your dacha. These designs can be easily transferred to the garden or veranda, and your child will always be in your field of vision.

Older tomboys will certainly enjoy playing with water. Build such an improvised “car wash” from plastic pipes, and the children’s joy will know no bounds. By the way, this is a great way to wash your child without forcing him or her into a shared shower.

Well, since we are talking about water procedures, take these into service useful ideas dryers for towels and air mattresses. What if you have a swimming pool on your property?

Finally, we bring to your attention some interesting design ideas. country interior. Pay attention to the original coffee tables and a compact TV stand.

A rack constructed of plastic pipes for storing linen, clothes hangers and even a bunk bed. For jacks of all trades, there are no unclimbed peaks!

If you cut PVC pipes into thin rings, you will get a universal ornamental material that will make a wonderful mirror frame and a decorative partition. You will need glue, a stencil and a flat surface.

Small pieces of wide-diameter pipe make excellent racks for storing shoes, towels in the bathroom, as well as cute bottle holders. Or here’s another fabulous idea for decorating a hallway!

Creative and textured bookshelves, a hanger in the hallway or a simple device for a dressing room, assembled from ordinary plastic tubes, is a great way to get rid of routine and boredom at home.

So what, did you think that’s all that can be created with the help of plumbing fixtures? Whatever the case! We meet the pinnacle of engineering - table lamps and floor lamps. Unexpected, right?

Well, before you come to your senses, another blow to the theory of Darwinism are elegant floor lamps and lampshades made of plastic pipes. Are you weak?

We found these useful ideas for country crafts made from plastic pipes on the Internet. Be inspired, dare, and may technological progress help us!

After any repair or construction work, there is always some excess materials, fasteners and other building elements left, however, you should not throw them away at all. In this material we will tell you what can be made from a plastic pipe left after installing a sewer or water supply system, if you apply imagination and a little work, as well as some useful ideas.

In what areas are PVC pipe trimmings used?

For those who were involved in laying and installing water pipes from PVC pipes on their own, it became quite obvious that the process of fastening such sections together is quite simple. Moreover, you can create practical and useful crafts from PVC pipes, which in functionality will not differ from traditional ones, but their design will be modern and original.

Even if you do not have special woodworking equipment at your disposal, but have a fairly broad imagination, armed with a tool for cutting plastic, glue and fastening links, you can create very useful device. And if the resulting frame is refined with some other materials, then you can get, for example, beautiful and comfortable furniture.

In particular, to make a light chair, you need to cover the frame with fabric, and if you need to hang a shelf, you will need brackets. Be that as it may, crafts made from propylene pipes will cost you much less than factory-made products.

Any homemade products made from PVC pipes fall into one of the following categories:

• solid - they are securely fastened with bolts and adhesive;
• folding ones are a kind of construct that, if necessary, can be disassembled and assembled independently.

Collapsible homemade devices PVC pipes are often classified as seasonal items. In principle, these can be any products - from folding chairs, garden tools and decor, to gazebos-canopies that can be used in summer time country or country holiday and disassemble for winter storage.

If you use ready-made ideas, you can get quite presentable homemade products from polypropylene pipes with your own hands. They are not only practical and beautiful, but also durable and do not pose a threat to human health or the environment.

It should also be noted that, due to the availability of plastic pipes, if breakages or defects are detected in the product, the damaged fragment can always be replaced with a new one of the same diameter. In any case, such repairs will be cheaper than buying new furniture.

Making country crafts from plastic pipes has many positive aspects:

• plastic does not need regular painting, although it is quite possible to decorate it with color;
• disassembled homemade designs very compact - for example, a carport or a child's bed will be neatly placed on the balcony or in the closet until spring;
• when heated, the polypropylene profile does not emit toxic substances, so it can be successfully used in the countryside in the summer;
• products made from this material have enough high level strength;
• thanks to the variety of sizes of plastic pipes, a wide variety of crafts can be made, and fastening elements - couplings, fittings - can always be found on sale;
• crafts from sewer pipes Doing it yourself is not only room for imagination and craftsmanship, but also an opportunity to create unique items as gifts for family and friends.

Of course, many children and adults will like original children's furniture, for example small chairs or even full-fledged armchairs. At the dacha, such products will organically fit into the surroundings, because they are beautiful, light, and easy to handle. And a do-it-yourself hanger made from PVC pipes, or a shelf for dishes, indoor flowers or books will only complement the resulting interior.

The characteristics of polypropylene pipes allow them to be used not only for water supply or sewerage installations, but also for the manufacture of seemingly unexpected items. So, by combining several pieces of profile, an electric cartridge and a cord, you can make a beautiful lamp.

Made from PVC pipes white You will get the following types of lamps:

• floor lamps;
• desk lamp;
• chandeliers with lampshades.

However, before starting work, we advise you to take care in advance that you have all necessary materials and tools. If you have pieces of pipe left over after repairs or your friends gave them to you, then couplings and fittings of a suitable diameter will most likely need to be purchased in addition. In addition, you will need a tape measure, a felt-tip pen, a drill, glue and screws. You also need to think about how you will bend the pipes. You may need other auxiliary materials for a number of crafts.

Examples of crafts made from PVC pipes for the home

From the waste polypropylene pipes left after construction in a city apartment, you can make many useful things.

Shoe shelves made of plastic profile

In the hallway of an apartment or house there is always the problem of compact shoe storage. Such a shelf can be made from plastic, having determined its dimensions according to the parameters of the hallway.

The shoe rack can be made of 2 types:

• with short bars from which the heel sags;
• to the full width of the shoe.

Connecting elements can be done using:

• couplings mounted on glue;
• bolts;
• self-tapping screws

To get wide shelves, you can use:

• scraps of laminated panels;
• plastic;
• pieces of plywood, optionally decorated with color.

Standing coat rack

A hanger made by yourself from plastic pipes must be strong and stable. For these purposes, it is better to use medium-diameter pipes. Additional rigidity can be given to the central axis by inserting a wooden tool holder or metal rod into it. It will not allow the hanger to sag under the weight of clothes.

The base, which provides stability, can be made in the form of a cross or wide struts in the form of a triangle. But buy ready-made hooks, quite long. They need to be screwed in place in pairs on both sides of the pipe.

For wall hanger you will have to make a slightly different design, however, if the family is large enough, then both options will be very useful at the same time.

Flower stands and flowerpots

The stand in the form of a shelf made of PVC pipes can be made free-standing or wall-mounted. You will need pieces of glass or thin sheets of plywood. However, it is undesirable for water from the pot to get on such a stand - stains and stains will remain.

Tabletop vase and organizer for small items

From short pieces of pipe you can make convenient cups for small items on desk. And if you want to make a wall-mounted flower vase, you can use halves of wide sewer pipes.

By adding decor in your favorite color, as well as gold or silver plating, you can get a truly unique product. When inserting the plastic bottom of a vase, the seam must be sealed with silicone to ensure a tight seal.

Animal crafts

From pipes you can make not only an aviary for your favorite parrots, but also labyrinths for cats, a dog bed, and many other frame-type products for pets. A net is placed around the enclosure, having previously provided a door.

A suitable location for an aviary may be:

• hallway;
• space under the stairs;
• secluded niche;
• dead end corridor.

So that a domestic cat can exercise and stay in good shape, you can build a special labyrinth for it by covering pieces of pipe with a rope attached to glue. And you can build a comfortable bed for your dog by simply upholstering a plastic frame on short stands with a piece of thick fabric.

Children's furniture

For the table and chair, in addition to the pipes, you will need soft upholstery with foam rubber for the seat and a piece of laminate for the table top. You need to take care to securely fix the legs, and also calculate the height of the chair that is comfortable for the child.

You can make a crib or even a playpen out of plastic pipes. They are completely safe for children and quite acceptable for creating children's furniture (read: ""). For convenience, you can use standard sizes factory products.

Please note that although PVC is safe, all handrails need to be disinfected as children love to lick everything.

The variety of shapes and diameters of PVC pipes allows you to create truly original decor in your apartment.

In particular, they also make such crafts from sewer pipes as:

• laundry dryer;
• frame for a basket for dirty laundry or a box for household waste;
• baskets and niches for tools and small components;
• shelves for books, small computer equipment or mirrors;
• covers for sharp objects, such as kitchen knives;
• gift crafts;
• screens and screens to delimit areas of the room.

What can be made from PVC pipes for the dacha

Greenhouses and greenhouses

Making a greenhouse out of lightweight plastic and covering it with film - many gardeners will like this idea, because it is very the required structure in the country.

In addition, you will need:

• rolled transparent slate;
• durable polyethylene film;
• polymer materials permeable to sunlight.

The entrance to the end of the greenhouse can be equipped with a light door or a silicone curtain made of strips. Such a structure is temporary - it is installed in the spring, and for the winter it is collected and hidden in a shed (read also: " "). This is convenient because, if desired, you can move the greenhouse to any other place near the path. In addition, there is no need to pour a capital foundation, because the structure is very light.

Vineyard arches and gazebos

From the remains of plastic pipes you can build a convenient frame for climbing plants, for example, grapes or climbing roses. It looks beautiful and the plant feels good.

As an option, you can make a summer gazebo from the same white PVC pipes for gatherings with tea. If you plant climbing plants around it, they will gradually fill the entire space of the lattice, creating cozy shade and coolness. Since plastic bends easily, it can be used to build a structure of any shape, just like metal or wood. And the gazebo will organically complement the garden exterior.

Stands and shelves for seedlings and flowers

To save space in a house where a lot of seedlings are grown, they can be placed in several tiers on a shelf made of polypropylene pipes. You just need to provide additional lighting by fixing it directly on the rack. Over time, the position of the spotlights will need to be changed so that the shoots are strong and even.

In the summer, flowering annuals can be placed on such a rack in the garden, which will add bright accent general decor.

Devices for vertical growing of plants

You can make a structure for vertical planting of strawberries from large-diameter pipes, drilling holes at equal distances for symmetry. Other structures are also relevant in the country, for example, hedges or all kinds of hydroponic structures, which will significantly save space if the area is small, and will also eliminate the need for frequent grueling weeding of berries.

Frames for hydroponic growing of plants in winter time can be placed in an apartment, organizing an analogue of a winter garden.

Car awnings

At the dacha, the problem often arises of where to park the car so that it does not overheat in the sun or get wet in the rain. This design can be made from PVC pipes. It is light, aesthetic and quite reliable. You only need to stretch a camouflage mesh or flexible slate over the frame.

Country furniture

For your dacha, you can make not only a sofa swing from PVC pipes with your own hands, but also a lot of other garden furniture on which you can relax after a hard day in the garden. For example, very original solution there will be a plastic cart for delivering food to the barbecue or grill. Preferably all garden furniture produce in one color scheme so as not to be too diverse.

To combine the design, it is better to choose some general material For:

• upholstery of chairs and armchairs;
• countertops;
• awning covers.

Shower cabin

In the summer, it is quite possible to build a shower stall on the site. Its basis will be the same PVC pipe, which can be disassembled and stored in a secluded place for the winter. You need to attach a container to the top of the cabin to heat water from the sun, and stretch opaque material in the gaps between the frame grille. You can make an improvised heated towel rail inside the cabin.

Children's house

But children will really like the canopy equipped for them, where they can hide and play Interesting games. Such an awning can be made permanent or portable so that parents can keep an eye on their children.

In addition, such structures made of plastic pipes as:

• bicycle parking;
• storage space for tools;
• fence for the site that does not require frequent repairs;
• dog enclosure;
• portable summer poultry house;
• design for a swimming pool made of thick film with a sun lounger.

Thus, handmade crafts for your home and garden will delight you not only with their appearance, originality and economy, but also ease of assembly and availability of materials. In addition, you will be able to unleash your creative potential and, at the same time, do something useful.