You can wash the acrylic bathtub with washing powder. How to clean a bathtub: bringing back the whiteness. Daily care at home

Having just appeared on the market, acrylic bathtubs won universal love and became widespread. The popularity of acrylic bathtubs is not surprising: the products differ at an affordable price, strength, low thermal conductivity, lightness and, most importantly, attractive appearance. But, like any plumbing fixture, an acrylic bathtub is susceptible to contamination and requires special care. How to maintain the whiteness and smoothness of an acrylic surface without damaging it - read below!

Which of detergents and cleaning devices to treat the surface of acrylic plumbing depends, first of all, on the properties of the material. Acrylic is a liquid metal that becomes solid when chemicals are added. In order not to disturb the structure of the coating (after all, some products can simply corrode acrylic), you should choose gentle products and soft sponges for washing. Before you start cleaning the surface of the bathtub, you will need to carefully familiarize yourself with the components of the chosen product.

So, mixtures in which you can find:

Chlorine. Leave the idea of disinfecting with chlorine: with a one-time use of this substance, the acrylic will sharply become cloudy, and with regular use, small pores will begin to appear on the surface of the bath.
Acetone (and other solvents), alcohol. These substances, upon prolonged contact with the surface of the bathtub, corrode acrylic.
Ammonia, acids and alkalis, as well as solvents, will damage the integrity of the surface of the acrylic bathtub.
Formaldehyde. Although companies producing household chemicals are gradually removing these substances from their formulations (due to the danger to human health), it is still worth knowing about the incompatibility of such a component with acrylic.

In addition, cleaning products for acrylic should be “soft,” that is, not contain abrasive particles that can leave small scratches on the smooth surface of the bathtub. At least polish it acrylic surface You can do it yourself (you can even fix large cracks and chips), but this is an extremely labor-intensive task. And why do work that can be easily avoided by purchasing a special product.

Household chemicals: is it possible to wash an acrylic bathtub with white

It is impossible to clean a bathtub with an acrylic thicket with accessible and familiar whiteness: the product corrodes the surface after several times of use, making it porous. A porous surface without a top protective layer becomes an ideal place for the formation of rust and stone deposits. A bathtub damaged in this way will either have to be repaired for a long time or completely replaced.

Stains that cannot be removed with detergents must be removed mechanically: rub the surface with soft sandpaper and cover the damaged area liquid acrylic.

Some housewives choose weak bleach solutions and bleach to disinfect jets in hot tubs: to do this, you have to fill the container with water with solutions, which is also not very useful for the coating. Moreover, for such systems today, separate compositions have been developed that take into account all the properties of the materials. Among them are: Mellerud, Cascade Complete, Edel Weiss, Santekh.

How to clean an acrylic bathtub

Special compositions for washing acrylic bathtubs prolong cleanliness by protecting the bathtub with a thin waterproof film. In addition, the acrylic bathtub can be cleaned quickly and easily with special means: the compositions do not need to be left on the surface for a long time, but are washed off with ordinary water under pressure. The most popular products for washing acrylic are cream-gels Akrilan, Sarma, Star-Acrylat.

In order to get the best result you should:

Apply the gel to a soft sponge.
Rub the surface of the bath and leave the composition for 5 minutes.
Rinse off the product with water at a temperature of no more than 30 degrees.
Wipe the surface of the bathtub dry with a cloth.

If you cannot find a special cleaner for acrylic, you can use a universal composition. The most suitable cleaning agent for acrylic surfaces is RAVAK Desinfectan: it is developed according to special technology, carefully removes dirt and effectively fights germs.

You should wash an acrylic bathtub with detergent no more than once every 14 days, and after rinsing off the composition, wipe the surface of the bathtub dry with a soft, moisture-absorbing sponge.

You can get rid of rust on acrylic surfaces with the help of Sun Klin, Mister Chester, Triton. If, in addition to cleanliness, you also have the goal of cleaning the surface from bacteria and microorganisms, then you should choose a detergent with antibacterial and antifungal additives. Among these are: Luxus professional, Cillit Bang, Cif.

Is it possible to clean an acrylic bathtub with soda?

The usual baking soda will also help clean a bathtub with an acrylic surface. The substance is sold in two versions: food grade and calcined. The second option is a strong alkali and is not suitable for cleaning acrylic surfaces.

In order to wash an acrylic bathtub with regular soda, you need to:

Apply the mixture to a soft, damp sponge and rub with your fingertips to soften the particles.
Rub the surface with the composition and leave it for 60 minutes to 1.5 hours.
Completely rinse off the product from the surface warm water under weak pressure.

When washing the bathtub using any means, you should protect the skin of your hands with rubber gloves, and do not touch the skin of your face and body, or household appliances while cleaning, so as not to get poisoned or irritated by chemicals.

Therefore, ordinary baking soda is often mixed in equal proportions with ash soda and the composition is diluted with water in a small amount. The mixture is applied in the same way as baking soda, but after 25 minutes, a solution of bleach (half a glass) with vinegar in a 1:1 ratio is applied on top of the mixture. After half an hour, rub the surface with a soft sponge and the compounds are washed off. Although this method is effective, it can be dangerous for acrylic (especially low-grade). Therefore, it is recommended to resort to it only when absolutely necessary. It is prohibited to use this method as a permanent detergent due to the harmful effects of solvent and alkali on acrylic.

Clean plumbing is the key to the health of all family members. A properly selected acrylic bathtub cleaner will allow you not only to maintain the shine and whiteness of the surface, but will also extend the service life of your plumbing fixtures and protect its surface from the harmful effects of moisture, pathogens and fungi. Choose recommended products and enjoy the cleanliness and safety of your bath!

The bathroom is, as you know, the “face” of the owner of the apartment. It is by the cleanliness of the bathroom that one judges the cleanliness and hard work of the fair half of a particular house. Of course, cleaning always takes a lot of time, but the bath should remain perfectly clean - even if there is a creative mess around.

True, to a large extent the cleanliness of the bathtub depends on the material from which it is made. If, for example, acrylic bath just wipe with a regular sponge and soap, then wash cast iron bath sometimes it’s not so easy...

8 best store-bought cast iron bathtub cleaners - what to look for when purchasing?

Each cast iron bath, as is known, is covered with enamel, which is applied inside the container using an electrostatic method, after which the product is “baked” in a heat chamber.

It is with cleaning the enamel that the housewife has problems: the enamel on cast iron bathtubs quickly loses its appearance under the influence of external factors and in the absence of preventive measures.

What is usually used to clean a cast iron bathtub?

First of all, against limescale , which covers the enamel with a nasty color due to bad water and the presence of various impurities in it.
Rust. The older the pipes, the more unpleasant rusty stains there will be on the bathtub. It is worth noting that in old cast iron bathtubs, zirconium components were used in the production of enamel to increase strength and improve other properties, but, alas, they contribute to the faster formation of rust, corrosion and scratches with cracks. Modern production processes use titanium salts, which ensure smoothness of the product and high wear resistance.
Fat. All the dirt that a person washes off the body, along with sweat and skin particles, settles on the bathtub machines. Naturally, when the container is rarely cleaned, all this settles on the walls of the bath and gradually builds up on top of each other, resulting in the formation of a serious and difficult-to-clean deposit.

It is also important to note that the enamel of old bathtubs is very, very fragile, and cleaning with aggressive agents can quickly damage the coating, even causing the dreaded “gaping” dark spots at the bottom.

How do Russian buyers clean their cast iron bathtubs?

Video: How to clean a bath quickly? How to make a bath snow-white?

8 Best Store-Bought Cast Iron Bathtub Cleaners

White. With its help, you will return your bathtub to its original whiteness and get rid of bacteria, grease stains, paint stains, fungus and mold. True, it will not cope with either limescale or rusty stains. Therefore, it is recommended to use the product where strict and emergency resuscitation of the container is not required - just “add gloss and return whiteness.”
The product is diluted 1 to 2 and the container is washed with a hard sponge (not metal!). You can also pour into full of water bath 100 ml of white, shake and leave overnight. It is strictly not recommended to use the product in its pure form! The average cost is about 60-80 rubles.
Mister Muscle. It will help you disinfect the bathtub, clean it from limescale, dirt, and grease. This composition penetrates very deeply (with correct use) into the structure of stains and quickly destroys them.
Plus, unlike white, Mister Muscle is much easier and more enjoyable to use. Pros: presence of a trigger, absence of abrasives. The average cost is about 200 rubles.
Cif. One of the most popular cleaning products in general today. Sif is used successfully both in the kitchen and in the bathroom.
This product instantly and effortlessly removes even old rust and heavy limescale deposits, leaving all surfaces shiny after use. We recommend Sif Ultra White, which has whitening properties. The average cost is about 180 rubles.
Comet. Another ideal product for cleaning cast iron bathtubs. Today it is available in convenient plastic bottles in the form of a gel; it does not scratch the enamel and easily removes all “troubles” from the surface of the bathtub, and at the same time all microbes.
It is enough to apply the product and wait 10 minutes, then wash off the dirt with a sponge. The average cost is about 190 rubles.
Sanox. A powerful product for the most difficult stains. One might say, “heavy artillery” in household chemicals. Sanox allows you to wash away everything that previous products couldn’t deal with. And white-hot. This gel will also remove all bacteria and unpleasant odors. Remember that this product is very strong, and for thin enamel it is better to choose a product with a more gentle composition. The average cost is about 100 rubles.
San Klin. This product contains no phosphates or harsh abrasives and is suitable for any bath. It does not have a nasty chemical smell, it is easy to apply using a trigger, and quickly removes any dirt. Average cost – 170 rubles.
Frosh. Aromatic eco-product based on fruit acids. Not suitable for heavily soiled bathtubs, but ideal for preventive maintenance and regular cleaning of the container.
The product is safe for people and washes off easily. The average cost is 250 rubles.
Mr. Chister. A product with an effective composition that will help remove fungus and mold, destroy bacteria and odors, and wash away light stains. It has a spray bottle and has a pleasant aroma. Average cost – 150 rubles.

How to clean a cast-iron bathtub from rust and plaque at home - 7 best folk remedies for cleaning bathtubs

Not everyone uses store-bought products when cleaning their home.

Some people fundamentally do not want to spend their money on expensive household chemicals, while others fundamentally do not use them, choosing safe home remedies. Still others are allergic to household chemicals, while others simply suddenly ran out of all the “saving bottles” in the nightstand under the bathroom. In these cases, “grandmother’s remedies” are used.

Among all the folk recipes used when cleaning a cast-iron bathtub, we have chosen for you the most popular and effective:

To remove rust. Take 1:1 ammonia and regular hydrogen peroxide, mix and apply to areas with stains.
We remove rust and yellowness. Mix salt and vinegar 1:1 and lubricate problem areas with this paste. You can leave the mixture for several hours - it will not harm the coating.
From limescale. Mix salt and soda 1:1, apply the mixture to problem areas for 2 hours, then wash off the already softened plaque with a regular sponge.
From limescale. Dilute oxalic acid to a semi-liquid consistency, lubricate the plaque, wait 1.5 hours.
For regular cleaning. We apply regular soda to a sponge and treat the bath with it instead of powder. Simple, economical and without harm to the surface.
From rust. Mix turpentine (35 ml) and salt (about 100 g), apply to the surface and clean.
From rust and plaque. Mix 3 parts mustard (dry) and 1 part soda, clean as with regular powder. Ideal for cleaning your bathtub once a week.

Video: How to clean a cast-iron bathtub from plaque at home?

Bathtub cleaning tools and products – what should not be used to clean a cast iron bathtub

If you inherited an old and rusty cast-iron bathtub along with your apartment (or, while you were on a business trip, your family brought the bathtub to the point of “easier to throw away”), then you should remember: What products and tools are not recommended to be used so as not to damage the enamel:

Products with chlorine (unless you're dealing with mold).
Products with aggressive acids. They are used only “spotwise” on problem areas and are not left for long.
Products with abrasives . They can scratch the enamel, which in turn will be the beginning of the end for your bath. Through scratches, rust and plaque will penetrate deeper and deeper, the cracks will become larger, and then it won’t be long until the cast iron itself.
Products with concentrated hydrochloric acid.
GOI paste. It is not used for polishing enamel! If you decide to polish, use a super-soft auto polish and a regular soft white cloth for the enamel. Polishing will take you 20-30 hours, but you will like the result.

When choosing tools to clean your cast iron bathtub, avoid...

Hard brushes.
Sponges and brushes with metal.
Fiberglass sponges.
Blades and other auxiliary tools.

Ideal option - a moderately hard sponge or a regular brush with a handle.

Also today, housewives successfully use and melamine sponges - But, for all their magical effectiveness, they remain extremely toxic when melamine enters the body, so their use remains controversial.

Prevention of dirt and deposits on cast iron bathtubs

No one will argue that it is much easier to keep a bathtub white if you wash it regularly and care for it properly. Moreover, if it is a cast iron bathtub, which requires a special approach.

You can extend the life of your bathtub and postpone its replacement (installation of liners, etc.) through simple manipulations called prevention:

Rinse the bathtub with a mild detergent every evening after everyone has washed . Be sure to dry it with a towel to prevent rust.
Twice a week - or at least once - we thoroughly clean the bathtub - with a serious remedy.
We repair taps/mixers immediately upon detection of a malfunction. Leaky faucet = deep rust.
We use soft tools and tools for cleaning.
We monitor the water temperature. At temperatures above 65 degrees, cracks may form in the enamel.
We quickly remove all cracks and chips - with the help of a specialist or independently - using a special putty and epoxy resin.
We prefer gel and paste cleaning products . Powder products contain abrasives that scratch enamel.

If you follow all the rules, you can extend the life of your favorite bath by 10-15 years.

However, there is always an option with an acrylic liner, which is placed directly in a cast-iron bathtub.

The site site thanks you for your attention to the article! We will be very pleased if you share your feedback and tips in the comments below.

Sometimes we waste time, effort and money on cleaning, without even realizing that all the basic tools are at hand, and that this or that dirt can be washed off much easier and without extra effort and nerves. Usually the stumbling block is the bathroom, namely the bathtub. And all because these rooms, like the kitchen, due to their specific nature, can become dirty not only with ordinary dust. The most important enemies of the bathroom are mold, mildew, rust, and limescale. All this can appear in just a week of intensive use of the water supply. And if the water is not of very high quality, plaque, for example, or yellow spots will be a fairly common companion to the bath.

Therefore, let's look at how you can clean out certain contaminants. Let's try to use improvised means. Let's look at the main questions:

how to clean a bathtub without chemicals;
how to clean an acrylic bathtub;
how to clean a cast iron bathtub;
how to clean a bathtub with soda, citric acid, vinegar.

Let's figure out what can be done at home with severe dirt or fungal infection of the surface. But everything is in order.

Commercial chemistry

It’s impossible not to mention the many bathroom hygiene products, of which there have been a colossal number lately. A variety of powders, creams, gels, sprays and other substances will reliably wash away the most stubborn stains. Let's try to look at the issue of choosing a product from the point of view of savings.

So, we don’t take into account specialized products, let’s turn to the experience of mothers and grandmothers. Whiteness has been the enemy of any dirt for many decades. This is the simplest composition, essentially diluted chlorine. And we know the ability of chlorine to clean and bleach. But white cannot be used in its pure form for an acrylic bathtub. Therefore, if you need to clean such a surface, say from yellow stains, you can make a solution at home. To do this, dilute 2-3 tablespoons of bleach and a little ordinary shampoo per liter of water. The result is a fairly mild product that will clean and not damage the surface of the acrylic bathtub.

The product can be sprayed onto the entire tank, or it can be applied with a sponge exclusively to yellow spot, as a result the surface can be easily cleaned. Thus, the costs will be minimal and the results will be good.

For enameled cast iron bath You can use bleach diluted in water without using a softening detergent. However, persistent limescale or serious rust may not respond to such manipulations, and here it will be necessary to resort to acids.

An important point is that for a new cast-iron bathtub and for an acrylic surface it is better to use a hard, but fabric sponge without metal inserts. And all because surfaces are easily scratched. It is best to use more effective “solvents” of dirt rather than vigorously rubbing the surface with harsh products.

Limescale and rust

Every housewife's worst nightmare. The fight against these pollution continues constantly. And no matter how it may seem that an acrylic bathtub is not susceptible to them, with “red” water and a leaking tap, even on a snow-white acrylic surface, sooner or later an unpleasant orange stripe or spots will appear. Limescale also does not appear out of nowhere. This is all a tribute to tap water, which contains many elements of inorganic chemistry that are deposited over time, and not only on the tank itself. They do not bypass tiles. And here working with whiteness is unlikely to help, unless the contamination is not too severe.

The best fighters against rust and plaque are acids, namely: acetic, hydrochloric, oxalic, citric. Moreover, with the correct dosage and use, even a fragile acrylic surface that is heavily soiled can be cleaned without much difficulty. For greater effectiveness, you can use baking soda. Let's turn to school chemistry lessons. Soda is an alkali; when combined with an acid, an active reaction process begins, during which hydrogen is released. Rust is iron that will be broken down in a chemical reaction under the influence of two environments. It turns out that you can use either soda with a certain acid (even with vinegar or citric solution, which is always available at home), or separately with acid. It’s quite problematic to simply find them, but to determine them yourself required quantity very difficult.

Attention! When working with any chemicals, especially using soda and acids, which in any case will give a reaction, be sure to take appropriate safety measures. At a minimum, wear rubber gloves, do not lean too close to the reacting substances, or use goggles. Another important point is protection respiratory tract. When working with acids, rule one is not to sniff the reagents under any circumstances. Rule two is to protect yourself with a cotton-gauze bandage or a respirator.

It would seem like an everyday thing, why listen? But acids, including household chemicals, are substances that release odor molecules that can be just as caustic and cause chemical burns to the lungs. Therefore, it is best to protect yourself, even when working at home. Moreover, the use of overly active components cannot be done every day, but only used when there is a high degree of contamination. Usually it is enough to clean the bathtub in this way only 1-2 times a month.

So, how can you clean the bathtub, if not chemicals? An interesting question, to which there is actually no answer, because all the means that are used relate to either organic or inorganic chemistry. But this expression often means not using cleaning products. By the way, in the fight against fungus or mold, you need to take especially seriously special means, since they are especially dangerous for allergy sufferers. Therefore, without chemicals, in the case of fighting fungus, you will just use, for example, vinegar and soda. The result will be an excellent result and a minimum of workload.

By the way, the fight against mold and mildew is an important and necessary measure, especially for allergy sufferers, since both microorganisms do not attach too strongly to the surface, as a result of which they can enter the surrounding air and cause an exacerbation of allergies. In addition to soda and vinegar, copper sulfate and antimicrobial solutions that can be made at home are used to combat fungus and mold. They can be applied to both cast iron and acrylic bathtubs. Moreover, the edges of acrylic bathtubs are often a favorite habitat for fungus.

In conclusion, we derive several axioms. First, cast iron and acrylic bathtubs can be easily washed using available means. Secondly, under no circumstances should you use hard sponges with metal particles. It is also better to dilute abrasive powders with water or a mild detergent and soap.

A clean and sparkling bathroom is the pride of any housewife. However, keeping it in perfect order requires a lot of effort. This is especially true for apartments or houses where large families live.

When purchasing an acrylic bathtub, many housewives are sure that it must be washed exclusively with special, expensive products. However, practice shows that this is not at all the case. In our article we will tell you how to wash an acrylic bathtub at home. From the listed options, you will surely find an effective and efficient option that suits you.

Why acrylic?

Previously, bathtubs were made from cast iron or steel, so they were heavy and massive, which did not suit all consumers. Acrylic bathtubs appeared on modern market plumbing is relatively new and has the following advantages:

smooth and perfectly flat surface;
light weight.

How not to wash an acrylic bathtub at home

To begin with, we suggest you understand the techniques and methods that absolutely cannot be used for cleaning an acrylic bathroom. If you want the product to serve you faithfully for many years, remember the means that are strictly prohibited when disinfecting:

Bleaching

Never try to clean the surface of an acrylic bathtub with pure chlorine or chlorine-containing products! Instead of a glossy and uniform shiny surface, you will get cloudy bathtub walls. If you re-treat an acrylic surface with chlorine, you will get a bathtub riddled with small pores into which dirt will constantly clog.

Washing powders and cleaning products with abrasives

Everyone knows that abrasive particles easily scratch any surface, including acrylic. Naturally, scratches and damage can be rubbed out and polished, but in the case of a curved bathtub surface this will be a very problematic task.

Ammonia

With prolonged use of ammonia solutions, acrylic gradually deteriorates, and the surface from glossy becomes matte and unaesthetic.

Acetone, solvents, gasoline

These are the products that can quickly ruin the acrylic surface, making it cloudy and unattractive. And with prolonged exposure, solvents, like ammonia, corrode acrylic.

Formaldehyde

In modern everyday life, formaldehyde-based products are no longer used, but just in case, it is important to know about their incompatibility with acrylic coatings.

Rules for caring for an acrylic bathtub

To prevent global contamination, it is enough to wash the enamel after taking a bath with hot water or a soft sponge with regular soap. Tip: If you treat polished acrylic enamel with hot water, the surface will shine even more!

The main rule: no brushes or rough steel wool! All detergents must be applied only with soft rags or sponges without an abrasive surface. Useful advice: Before trying out a new cleaning product, try testing it on an inconspicuous area of your bathtub. Wait 10-15 minutes: if there are no negative changes, feel free to start cleaning.

You should be careful when disinfecting acrylic bathtubs, because without special care, pathogenic harmful microorganisms accumulate in the nozzles and pipes. The main thing is not to use chlorinated solutions! Specialized products also often contain chlorine, but its effect is smoothly neutralized by other components.

Important: to keep the bathtub enamel shiny, rub the acrylic in a circular motion using a soft cloth dipped in wax-based polish.

Possible contamination of an acrylic bathtub and methods of elimination

Sooner or later you will have to face different types pollution, so you need to be prepared for them quick elimination. Let's list the most common ones:

Solutions for cleaning acrylic bathtubs and removing limescale

Acrylic is a type of plastic (polymer) and has high performance characteristics. Unlike a steel bathtub, the material does not rust or peel off, and is also not afraid of water: even dirty, hard or very hot.

Polymers do not support the active use of household chemicals, and the use of non-household chemicals is completely excluded. How to deal with pollution? It is necessary to use an active medium that is not capable of reacting with the surface. These include citric acid and vinegar.

However, using them in pure, undiluted form is dangerous, unlike aqueous solutions.

Acrylic bathtub cleaning solution

In stores today there are a lot of specialized products that can be used to remove lime or rust deposits. But if you don’t want to overpay, we recommend listening to advice on how to wash an acrylic bathtub at home + from limescale.

Acid solutions perfectly remove water stone and limescale at home, which many products cannot cope with.

Removing an acrylic bathtub from defects

Acrylic enamel is susceptible not only to dirt, but also to scratches of varying depths. At the same time, acrylic is in some way a unique material, because how easily it is scratched, so easily these scratches are then removed.

To remove minor enamel damage (up to 0.5 mm deep), take a piece of ordinary felt and polish the surface. If the scratches are pronounced and deep, they can only be eliminated with liquid acrylic. In this case, there is no need to call a specialist: it is enough to purchase a kit for repairing acrylic bathtubs, consisting of a plastic spatula and a tube of liquid acrylic, which is applied to the damage. After drying, the application area is polished with felt.

Liquid acrylic can even seal a through hole. To do this, tape is glued to the outside of the bathtub and the space is filled with acrylic in several stages.

Sometimes the damage and contamination are so severe that an acrylic bathtub can only be saved with the help of special liners, which are sold in plumbing stores.

Remember: acrylic is afraid of exposure high temperatures! Therefore, even the ash from a cigarette will leave a noticeable stain.

Treat your acrylic bathtub with care and caution, then acrylic sanitary ware will serve you for many years!

The bathtub is often exposed to various types of contamination. Except unkempt appearance plumbing fixtures, rust, limescale can become a source of large amounts of bacteria and also cause unpleasant odor. Traces are left by children's toys, shampoos and other products left on the sides.

Therefore, many housewives are interested in the question of how to clean a bathtub at home. Today, fortunately, household chemical stores can please us with an abundance of various detergents that will not only help clean a dirty bathtub from plaque, but will also remove rust and other contaminants.

Before you start looking for a way to help clean the bathtub white, you need to understand with the reasons for the appearance of stains and other stains.

Soap residue. The result of using various shampoos, bathing products and regular soap is the appearance of a film on the surface of the water in the bathroom. It is not always possible to remove it by simply rinsing. This film eats into the surface of the plumbing fixtures, and it is no longer possible to do without detergents.
Lime deposits formed from high hardness water. This is the most common bathroom problem.
Rust Causes tap water with a high iron content.
If the bathtub has turned yellow, The reason for this was old pipes, which are not always washed well.
usually accumulates on tile seams between parts, on window slopes, and on the ceiling. This fungus is very dangerous to health, therefore.
Colored spots may result from careless handling of a spilled or spilled solution of potassium permanganate, brilliant green and other substances.
Contamination from ongoing repairs. The bathtub is very susceptible to various stains and dust easily settles on it. Therefore, when carrying out repair work it must be protected with film or other materials.

The old bathtub has cracked enamel, into which any dirt can easily penetrate.

Main types of pollution

Help to remove rust from a bathtub at home the following means.

Ammonia. Apply it to the stains for a few minutes and wash off with water.
Lemon juice. The method is the same as with ammonia.
Cooking surface treatment salt and table vinegar.

You can also clean the bathtub from rust using soda ash (sodium carbonate). It is sold in any household chemical stores. The procedure will be as follows.

Mix two types of soda (ash and baking soda) in equal proportions.
Add water to obtain a homogeneous pasty consistency.
Use a sponge or brush to evenly distribute the composition over the surface of the product.
Table vinegar and bleach in powder granules are also combined in equal quantities.
Apply this mixture to baking soda.
Wait 30 minutes and rinse well with clean water.

Alcohol and hydrogen peroxide also help with rust. These components are mixed in the following proportion: one part alcohol and two parts peroxide. Dip the sponge in the solution and cover all dirty areas with the liquid. After 20 minutes, rinse with water. Here's how to clean alcohol and peroxide from rust without leaving a trace.

Limescale

It comes off if you clean the bathtub soda and vinegar.

Mix baking soda with baking soda, apply to the surface of the product, and leave for 30 minutes. After this, rub a little and rinse with water.
Paper towels are soaked in vinegar and used to cover the entire inner surface of the bathtub. After 5 hours, the towels are removed and the product is washed with water.

What else can you do to clean a bathtub from yellow deposits? Will help out citric acid. 100 g of product is dissolved in 400 ml of water. All yellow areas on the bathroom are covered with this product using a sponge.

Within two hours, the coating is repeated at intervals of 10-15 minutes. Then rinse well with water. The procedure is quite tedious, but it will perfectly help clean the yellowness from the bathtub.

It often forms in places where the bathroom is adjacent to the wall. It can be cleaned with activated carbon. Coal is mixed with white to a pasty consistency and the composition is distributed over the mold. After an hour, wash off with water.

Another effective method is using baking soda. How to clean a bathtub from mold with baking soda? Very simple. It is applied to the problem area in a fairly thick layer, then watered generously with table vinegar. After the reaction is complete, rinse everything thoroughly with water.

Methods for different types of baths

How to clean an acrylic bathtub?

An acrylic bathtub requires careful, careful handling and the same cleaning. Care should become regular, consisting of rinsing after each use of the product using gentle products.

Prohibited use:

products containing alkalis and acids. They are destructive to acrylic;
solutions containing alcohol;
chlorine bleaches and other products containing this substance.

Wash the acrylic bathtub from limescale with a weak solution of washing powder. If the surface of the product is not damaged, then this method will do the job perfectly.

At home, an acrylic bathtub is washed to remove rust and other deposits with table vinegar (which is preheated) and salt. An alternative could be a mixture of the same table salt and turpentine. The same products will help remove yellowness from an acrylic bathtub.

Since this cleaning method is quite aggressive, test it on an inconspicuous area before using it to clean your acrylic bathtub. Otherwise, the plumbing may deteriorate.

An enamel bathtub has a top layer that is quite thin. Therefore, in this case, all methods of rough cleaning are contraindicated. At home, you can use hydrogen peroxide, ammonia, proven soda and vinegar.

Rust is removed with a mixture of water and soda, which is applied to the stain, left for about one hour and washed off well with water. Soda ash with the addition of baking soda will whiten the surface. Limescale deposits will be removed by ammonia and fresh lemon juice.

You can also clean an enamel bath with mustard. It will not only remove dirt, but also thoroughly disinfect the surface.

How to clean an old cast iron bathtub?

Such plumbing products are typical of old houses. The technology for the production of cast iron bathtubs was based on the addition of zirconium salts to the material from which they were made. It is because of them that yellowed spots form after contact with water.

Wash cast iron bathtubs to remove yellowness with table vinegar. Pour a full bath of water and add 200 ml of essence to it. Leave for 3-4 hours, rinse well with water. This universal cleaning liquid has repeatedly helped housewives in different situations, making ordinary household cleaning better and more effective.

Helps remove rust from a bathtub good way based on soda and liquid soap. A paste is prepared from these components, which is used to rub the rust and its stains.

Ammonia will help with very old stains. It should be added to 0.5 cups of liquid soap and spread the composition over the surface of the bathroom. After this procedure, the bath will become shiny again. If you know how to clean an ancient cast-iron bathtub, you won’t have to replace the product with a new one, and it will last for many more years.

Removing other types of contaminants

These two components are the most common types of stains in the bathroom. Even a weakly concentrated solution of manganese will leave dark marks on the surface of the product.

A drop of brilliant green solution will also add color.

Manganese is washed with a solution of hydrogen peroxide and lemon juice (or fresh lemon juice), they will not only quickly discolor the stains that have appeared, but will make the bath shine.

Remove the green stuff with alcohol. However, if the surface of the plumbing fixtures is made of acrylic, then alcohol may be powerless against contamination.

How to clean a bathtub after renovation?

To avoid having to deal with its consequences on a stained bathroom upon completion of the repair work, the product must be protected from contact with building materials. If trouble happens, you can use by the following means.

Any solvent (for example, white spirit) will help to clean the paint from the bathtub. It is important to work quickly so that the paint does not have time to soak into the surface.
First wash off the dusty deposits with warm water, then clean with citric acid.

How to clean bathtub sealant?

Sealant is another type of stain on the bathroom. It is used to ensure the reliability of joints and seams. Sooner or later the question arises...

In this case, you can use traditional methods using table salt, but it is better to buy professional products specifically for such cases.

How to clean an old bathtub?

If the bathtub has been in use for many years, then dirt appears on it very quickly. They penetrate into all microcracks that have formed on the surface over time.

Not all cleansers can easily restore it to its original appearance. It is better, of course, to replace the plumbing. But if this is not possible, then soda ash will help. The procedure for working with it was described above.

Cleaning chrome surfaces

The taps above the bathtub and shower hoses require no less attention than the plumbing product itself. Limescale and rust also appear there - the first enemies of bathrooms. Chrome covers faucets, bathtub handles and other elements.

All-purpose baking soda, which is applied to the product, will remove rust from a chrome surface. You can also use table vinegar or tooth powder. All components are evenly distributed over objects using a sponge or soft cloth. The chrome parts are kept in this state for about half an hour, then washed with water.

There are many ways to answer the question of how to clean a bathtub from various contaminants. Follow the above rules and recommendations and your bath will shine. But it's better not to wait spring cleaning, and take care of the product regularly, then you won’t have to waste time and effort on removing significant old stains.