Installing a door handle on an interior door. Instructions for installing a door handle on an interior door. How to Install a Latch Door Handle

Installing door handles with your own hands is quite a troublesome task, especially if a person is faced with this task for the first time. In order to avoid difficulties during the installation process, it is necessary to consider the design and basics. Depending on this, the work may be performed with some differences.

Installation technology various types door handles have their differences

Handle design

Before you install door handle it is necessary to delve into the design features modern models this type of fittings. Of course, the specific type of system is of great importance, but several general defining points can still be identified.

The design of a standard handle consists of the following parts:

• lever;
• ring;
• kernel;
• socket;
• travel limiter;
• stoppers.

You should also take into account such details as the tongue and locking mechanism, the metal cover on the box, and the tightening screw. The last part is used when mounting the handle on hollow interior doors. It acts as self-tapping screws, fixing the system by tightening opposite sides. You also shouldn’t miss another important piece of the design – the latch. If this type of locking system is present, an additional turning screw must be inserted.

Push-type door handle with tongue for secure door fixation

You shouldn't get down to business if you're not sure you can put everything together. correct sequence with your own hands. Otherwise, you may lose important parts or completely damage the product.

Types of handles

The process of installing handles on interior doors with your own hands may differ depending on the type of mechanism used. Typically, the following types of handles are installed on interior doors:

• On the socket– they are easy to install with your own hands, since there is no need to drill a large hole; it is enough to ensure free movement of the rod. Externally it is decorated with a rosette overlay.
• Nobs- This is a rotary system that looks like a round handle with a latch or keyhole. This is a fairly convenient option, especially if you install such a system on a bathroom door, but if low-quality materials are used, it quickly breaks down.
• Push– to open the door, you need to move the handle to the lower position by pressing it. This removes the halyard latch, which returns to its place immediately after releasing the handle.

The most popular types of door handles

Required Tools

Before you try to install a handle on an interior door, you need to prepare your tools. You don’t necessarily need everything, especially if you purchased the simplest fittings. In order to install handles and latches on the doors with your own hands, you will need:

• drill;
• screwdriver;
• a set of drills, including a “feather” and crowns of different diameters;
• chisel;
• hammer;
• self-tapping screws;
• square;
• pencil;
• stationery knife;
• awl;
• roulette;
• conductor.

The last tool is a template for installing handles. It will facilitate the process of marking and drilling all the necessary holes.

A screwdriver will make the job of installing a door handle much easier.

Installing a handle on an interior door

Before inserting a standard door handle into an interior door, you need to make markings. To do this, use a square and a pencil. Measure the required height from the floor. Usually this value varies between 80-100 cm. If you have a prepared conductor, everything is much simpler. Just screw it to the door from the end. The holes will subsequently align with the tongue cover. So, let's look at how to insert a handle into an interior door with your own hands:

1. Drill using a drill and a hole saw through hole in the canvas.
2. Using a pin drill or a smaller hole saw, drill through the end of the door.
3. Then you need to put a tongue inside with locking system and check its operation.
4. Trace the contours of the trim and remove a thin layer of material so that the piece of iron is installed flush. Screw the part with self-tapping screws.
5. Insert the rod inside the already installed part. Place a handle with a ring and rosette on top. If the ring rubs against the door, you need to recess it by grinding off a small layer of coating around the hole with a chisel.
6. Screw the handle with three self-tapping screws or secure with tension pins.
7. Attach a decorative trim on top. The connection in most models is adjusted with a hex key.

In order to install the metal trim on the frame, you need to mark the position of the tongue. This is convenient to do at the stage of installing this very part into the canvas. Drill or scrape out a recess of the required size in the box. Then trace the iron plate, press it flush and secure it with self-tapping screws.

Lock mortise

It's one thing to install simple fittings, but how to install a handle with a lock on an interior door? To do this, it is better to remove the fabric from the hinges in order to carefully embed the lock.

An example of a high-quality embedded door handle of a simple design in a new leaf

Now let's look at how to properly install a handle with a lock on a door with your own hands:

1. Mark the position of the lock on the end of the door, outline the contours of the system.
2. Using a pen, drill several holes in the marked area, and carefully gouge out the rest with a chisel, periodically checking the passage of the lock.
3. Remove a couple of millimeters of coating to recess the iron plate.
4. In order to insert the handle, you need to drill a hole on both sides of the blade, suitable in diameter for the free passage of the axis. To mark its position, make a mark on the lock with a pencil, set it temporarily in place and transfer the mark to the door, and then measure the required depth.
5. Secure the lock with self-tapping screws.
6. Insert the axle inside and deepen the ring.
7. Install the handle, lock it in place.

Make a recess on the frame for the pin and tongue to fit into. Press the nozzle flush and secure with self-tapping screws.

If play is formed, it is necessary to file the handle axis with a grinder. Some manufacturers put special marks on it to make this easier.

Latch Installation

Another question - how to install latches on door handles? In most cases, this is no more difficult to do than inserting the handle itself. Let's look at how to quickly install a latch handle on an interior door with your own hands:

1. Drill an additional hole in the door. It should match the position of the latch mechanism.
2. Thread the axle into the lock and install the cap on top . You need to install a plug or key lock on the back side of the room. A rotary latch is attached inside.
3. Fix the position of the parts with self-tapping screws and disguise the fastening with decorative caps, if provided for by the design.
4. An additional hole is cut on the frame for the latch tongue, if there is one. If the lock operates on the principle of fixing the halyard tongue, no additional recess is required.

As you can see, installing interior door handles with your own hands is a troublesome task, but quite accessible even for a beginner. Please note that misalignment of parts can lead to rapid breakdown of the fittings.

Installing a door handle on an interior door is done with your own hands, since door blocks are not supplied with fittings. To do this, you need to select a tool to perform the required work. Each fitting comes with instructions for use. The installation height from the floor covering that is comfortable for a person is indicated, design diagram. If there are no instructions on installation height, one condition is necessary for door handles. A person should not open the door in a bent position (about 1 m from the floor).

Drawing with dimensions for installing door handles

Depending on the wishes of the person, only the installation of the handle of the door opening mechanism or door handles with mechanical or electromechanical lock. The industry produces various systems for locking a home or room. The peculiarity of locks is that millions of structures must be opened with different keys.

Installation work must be performed in a certain sequence:

Step-by-step instructions for installing a door handle

• screwdriver (drill);
• carpenter's meter, marking pencil;
• set of wood drills, bit for drilling large diameters.

All door handles can be divided into overhead and mortise. Mortise handles can be divided into rotary designs and rotary ones with a lock. To protect the lock from unauthorized opening, it is necessary to create production facilities for the production of locks and keys of various modifications and sizes.

Scheme for mounting a door handle

Mechanism installation process door lock with a handle

The process of marking a door for installing a handle

The next task is to accurately drill the hole for the handle. Having removed the latch, drill a signal hole with a small drill. Insert the latch and visually determine the accuracy of the hole in the door leaf and the hole in the latch.

The process of drilling holes for door handles

Marking the door for the groove

Installation of mortise locks with handles

Mortise locks with a rotary handle and a lock at the end of the door leaf, a special design of the lock cylinder, are produced by manufacturers of more than a million variants of locks. The number of such models available is sufficient for metal and wooden doors. Do-it-yourself installation of mortise mechanisms begins with carefully marking a diagram of the mounting mechanisms on one side of the door.

Door marking diagram for installing a door lock

When working, you have to use chisels of different sizes, periodically sharpening sharpening machine or a block at a certain angle.

After making sure that the lock structure is completely recessed into the door leaf, we make a signal hole using a drill with a thin drill for a rotary handle, having previously removed the lock from the door.


We check the accuracy of the hole and drill the door using a crown of the required size from both sides of the door to the middle of the leaf for the handle. After the installation of the lock and handle is completed, all screws must be tightened. After checking the functionality of the lock without closing the door, you can begin marking the groove for the loot.
IN door frame Opposite the lock, make a mark on the box for the latch. Having opened the door leaf, mark, arrange and secure the door with the groove.




If the groove is marked incorrectly and the lock tongue does not fit or there is a large gap, it is necessary to dismantle the groove and move the groove using a chisel. The chute pad and the lock bar should fit snugly, but without friction.

Reinstalling the handle

When purchasing interior doors, you need to be prepared for the fact that the fittings may not come with them. You receive the canvas and posts from which the doors are made. And in this canvas there will not even be a hole drilled for the handle. The thing is that the product can be very different, have a unique design and size. And the handle, which will be installed in advance, may not be liked by residents. In this case, you need to install a door handle on the interior door. You can do this work yourself. You just need to buy a suitable handle and install it.

What types of pens are there? What is the difference? How to install a handle on an interior door? You will learn all this by reading our article.

Handle for interior doors

First, let's look at what such a pen actually is. We are all familiar with them, but it is unlikely that most have thought about it. design features. It is important for us that she helps open the door. However, during installation it would be nice to become familiar with its design. Here's what's included in a standard door handle:

1. Handle for opening doors (2 pcs.).
2. Decorative rings that cover the bolts and fastenings of the handle.
3. One rod or bar of metal that connects one handle to the other.
4. The socket is the body of the mechanical part of the structure, which cannot do without locks, springs and a tongue.
5. Stoppers that limit the movement of the tongue and handle.

But, in addition to the standard configuration, all handles for interior doors differ in the installation method, their shape, operating principle, material and the presence of a lock. If we talk about the installation method, there are two types of door handles:

• overhead or stationary;
• mortise

Overlays are fairly simple products that just need to be attached to the door leaf. The work is simple and fast. But mortise door handles are installed in the door leaf in mortise holes. Here you will have to work hard.

As for the way door handles work, they are divided into the following types:

If we talk about the materials from which they are made, then there is plenty to choose from. Some are made of wood, others are made of metal (aluminum, brass), there are even glass, plastic and stone interior handles. The most popular are metal products coated with chrome, nickel, etc. The material guarantees wear resistance and service life of the handle.

Note! Products may be equipped with a lock or sold without it. This is selected based on the user's needs. When you have to close the doors often when necessary, it is better to choose models with a latch and install it.

Nuances before installing the handle

Have you ever wondered how high the handle is? This is very important because if placed incorrectly, it will be inconvenient for users to use. If it is high, it will be difficult to reach, and if it is low, you will bend over. In fact, there is no single standard that is used to guide the installation of handles with or without a latch. However, there are some recommendations.

During operation, it was noticed that the optimal option for placing the handle for interior doors regarding height is a distance of 1 m from the floor. But, each owner can raise or lower this value, based on his own preferences and the growth of family members. It is important to remember one more point - be guided by the height of the handles that you already have in your home. Then it will be easier to choose best option. Having all the handles at the same level will make them easier to use.

Tools for getting the job done

Before installing handles on the door, it is important to ensure that all necessary tools for work. They are simple and can be found in everyone’s home. Here is the list:

• chisel;
• pencil or marker, square and tape measure;
• drill;
• drill, crown;
• screwdriver

Thanks to this set of tools, the job will be much easier. It is clear that you can embed the handle fittings without a crown with a screwdriver, but this will take more time and effort. A drill bit is an attachment for a drill, thanks to which you can make a perfectly straight hole in the canvas in just a few moments.

It is more convenient to do the work when the door is removed from its hinges. It’s much more convenient to work this way. Therefore, do not rush to install it in its place immediately after purchase. When it is not possible to remove it, you need to secure it well so that the blade does not move during operation. This is how you can clearly and correctly mark and embed the lock.

Another important point is to read the instructions for the pen. We are used to resorting to it only after wrong actions. However, to avoid them, you just need to read the instructions first. It will indicate all the dimensions, thanks to which it will be possible to ideally select the diameter of the pen and crown.

Now you can review the installation instructions, which will help you complete the task quickly, easily and without errors. And for those who are taking on such work for the first time, a visual video will be provided.

What to do

Let's look at the list of steps after which the door handle will be installed in its place. The whole job consists of completing 6 steps. Here they are:

1. Applying markings to the canvas.
2. Creating a hole for the lock.
3. Lock installation.
4. Handle insert.
5. Applying markings on the loot.
6. Creating a groove in the loot.

This is how to install a handle on an interior door. So as not to miss important details, let's look at each step separately.

Stage 1 - applying markings to the door leaf

Have you already decided on the height of the handle? If not, then it's time to do it. After all, marking will be performed based on this indicator. To correctly mark, you will need a square, tape measure and pencil. With their help, you need to mark on the canvas the places for the holes for the handle. You should measure the distance from the floor and draw a horizontal line with a marker. They move on from there, transferring the markings to the end of the canvas and to the opposite part.

Now you need to mark the place on the end where exactly the hole for the lock tongue will be placed. Along the same line on each side of the door, at an equal distance from the beginning (approximately 60 mm), a place for installing the handle itself is marked.

Stage 2 - creating a hole for the lock and handle

Using a drill and a hole saw, a hole is created for the handle. You will need to drill the leaf on each side, going exactly half the thickness of the door. To make the job more convenient, experienced craftsmen It is recommended to make a mark on the crown with a marker. Why can't you drill a hole on one side only? This way the crown can move to the side and the hole will be uneven. In addition, on the opposite side, the door trim may be spoiled and damaged. The drill is held strictly at an angle of 90 degrees. It is important not to allow deviations in any direction. And with a chisel after work you can remove and smooth out all the irregularities.

As for the hole for the lock, it is made with a drill with a feather of the required diameter. The work is done carefully, because the distance between the corner of the end and the feather itself is not very large. There is an opinion that it is better to first make a hole for the latch, and then work on the handle. But in what sequence to carry out the process is everyone’s business.

Stage 3 - installation of the door lock

This is an easy task once the lock hole is completely prepared. All that remains is to insert the lock into it. The lock pad is applied on top and traced around the edges with a pencil. Next comes the chisel. With its help, a layer of wood equal to the width of the overlay is removed using the marks. Then it can be recessed at the end of the door. To simplify the task, use chisels of different widths.

The overlay is fixed in the prepared place with screws. It is recommended to make holes for them in advance using a thin drill. It is enough to place the overlay in its place and mark the attachment points with a pencil.

Stage 4 - handle insertion

It's time to get to grips with the pen. They come with screws located on the outside. There is no need to disassemble this type of handle. You only need to stop one part in place, getting into the hole of the latch with its two guides. They have threads for bolts. After which the second half is attached and the two parts are tightened together using bolts. The twisting is carried out evenly so that the handle works without problems and the latch has a simple movement.

If the handle has hidden screws, then it will need to be disassembled. How to disassemble the door handle of an interior door? Often these handles come with instructions for assembly and disassembly, as well as keys for this. Based on it, we disassemble the structure, fasten the collapsible part with bolts and install the handle in its place. You should not use brute force; if everything is done correctly, the assembly will be easy.

Stage 5 - marking the loot

At this stage the door handle is ready. All that remains is to complete some details regarding the loot. You will need to cut a hole in it for the tongue and lock (if there is one). If you want the door to open and close easily, you will have to make high-quality markings.

To do this, you will need to close the interior door and mark the location of the tongue and lock on the front part, marking their top and bottom. The squares determine the exact middle of the lock and the markings are transferred to the end of the lock. Now you're ready for the final step.

Stage 6 - creating a groove in the loot

Based on the markings, using a drill and a pen, a hole is made for the tongue and lock. All excess is removed with a chisel. Next, the overlay is installed. But, before installing it, it is important to check the functionality of the handle for interior doors. You will have to close the door and check whether the handle tab and the lock fit. Don't be surprised if the closed door wobbles or wobbles a little. The thing is that the groove is not yet equipped with an overlay.

Now it's time to attach the bar. It is fixed flush so as not to interfere with the smooth movement of the door. In essence, the work is no different from fixing the overlay to the reverse side. Use a chisel to remove all excess, drill holes, and fix the cover with the bolts included in the kit.

To help inexperienced people cope with the task, we have prepared a visual video that will show how to install door handles on interior doors.

Conclusion

Don't be upset when the door you bought doesn't have handles. This, on the contrary, is good, since you can choose a product that will be convenient in your case. And since there are so many options, there will be plenty to choose from. There should be no problems installing the handle on the interior door. Thanks to step by step instructions it will be standing in just a few hours.

This article will describe the work performed to install latch handles on interior doors, which are the most popular in use today.

The latch handle has the following design.

The visible part of the handle may be perfect different types and it might look like this:

Or this way:

All such latch handles mainly consist of two parts, the handle:

and latch:

Each of these parts of the latch handle requires a separate insertion into the blade.

There are different types of such latch handles on sale, with a latch that have an additional mechanism installed in the handle itself, which allows you to lock the door from the inside, and from the outside on the handle there is a key holder that allows you to lock the door. There are also such handles and they cannot be locked without a lock. Latch handles from different manufacturers have different design features, which in no way can affect the process of inserting into the blade. Such handles have a latch on the inside, so the entire process of installing the latch handle is the same for everyone.

Therefore, if there are any differences, you shouldn’t have much doubt because of this and you should pluck up courage and start doing the work. And you should start with preparing the tools.

To do this, we will need tools for work..

• Screwdriver or hand drill.
• A crown with a diameter of 50 mm for wood.
• Made with size 23-24mm on wood.
• Pencil
• Chisel
• Hammer

In order to make the process of installing the latch handle into the door leaf as easy and quick as possible, you can purchase a special kit in specialized stores.

We begin to install the latch handle

1. In order to begin installation, you must first make markings on the canvas for drilling. If you purchased a special kit for inserting such a latch handle, then this kit already contains a marking diagram.

If you do not have such a diagram, then the markings can be done manually. To do this, we make a mark at a distance of approximately 1 meter from the bottom of the door leaf, then along this mark we measure 60 mm from the edge of the door leaf and make a mark for drilling, as shown in the photo.

2. On the side door leaf We also find the center and make a mark for drilling.

3. Next, take a chisel and for the front plate of the latch on the door leaf, hollow out a recess equal to 3 mm. It is better to drill out the center of the thickness of the door leaf with a slightly thin drill, so that later you do not have to make the marking again.

4. Using a crown with a diameter of 50 mm, we make a through hole. It is better to make a through hole on the door leaf on both sides so as not to damage the door leaf.

5. As a result of the manipulations performed, we will get a hole.

7. As a result, we get several holes on the door leaf.

8. Insert the latch into the hole on the side of the door leaf and screw it.

Using a special key that should be included in the kit or any thin and flat object.

Press the tongue in the hole.

and remove the handle.

10. After the handle, remove decorative cap and expose the mounting holes.

12. Insert the other half, and then tighten both halves of the handle with the screws that come with the kit.

14. Cover the door leaf and mark the place where the tongue touches the jamb, in this place we hollow out a recess for the latch tongue.

15. A plastic pocket must be installed in the hollowed-out recess.

16. Place a metal plate on top of the plastic pocket and screw it on.

As a result of the work carried out, the door handle-latch was installed, and the door is now ready for use.

This article will help you figure out how to embed a latch handle into a door leaf. By adhering to the work algorithm described in the article, you can easily perform this operation yourself, with a minimum set of tools and very quickly.

No door can do without a handle. The most popular type of handle for interior doors today is the latch handle.

The design of handles of this type is such that, regardless of appearance, they are all installed in the door leaf in the same way. This article will tell you how to do it yourself.

Latch handle design

The handle itself, that is, the visible part of it, can look completely different. So:

or like this:

All these latch handles essentially consist of two parts - the handle itself:

and the latch mechanism:

Both parts of the latch handle require separate insertion into the door leaf.

Latch handles come without a latch - a door with such handles cannot be locked from the inside, with a latch - an additional rotating mechanism installed on the handle and allowing you to lock the door from the inside, and a key - on one side of the handle there is a key holder that allows you to lock the door from the outside, on the other there is a latch . All handles have design differences that do not in any way affect the insertion process. The internal part (latch) is also the same, that is, it cuts in the same way for all types of latch handles.

So let's get started.

Necessary tool

To make the process of installing the latch handle as easy as possible, you will need:

1. Hand drill or screwdriver.
2. Wood crown with a diameter of 50 mm.
3. Wood drill with a diameter of 23-24 mm.
4. Chisel.
5. Hammer.
6. Pencil.

The crown and drill can be purchased separately, or in the form of a set, which is called “Kit for inserting latch handles.”

Installing the latch handle

1. We begin the installation process by marking the door leaf for drilling. The marking diagram, as a rule, comes complete with the handle.

If there is no diagram, you can mark it manually. To do this, place a mark at a distance of 60 mm from the edge of the door.

2. On the side edge of the door, along the center marking line, mark the center for drilling.

3. Using a chisel, hollow out a three-millimeter recess under the face plate of the latch. It makes sense to first mark the center with an awl so that you don’t have to mark it again.

4. Using a crown with a diameter of 50 mm, drill a through hole. It is better to do this on both sides of the door to avoid damage to the door covering at the exit of the crown when drilling.

5. As a result, we get the following hole:

6. Move on to the side edge. Using a wood drill with a diameter of 23-24 mm, drill a hole for the latch into the marked center. You should not make it too deep, otherwise you risk drilling through the door all the way to the panel.

7. We now have two holes.

8. Install a latch in the side hole and screw it with self-tapping screws.

9. Filming top part pens. To do this, look for a hole on the side.

Using the included key or any other thin flat object:

press the tongue inside the hole:

and remove the handle itself:

10. Remove the decorative trim and thereby open the mounting holes.

11. Insert the outer half of the handle.

12. Insert the inner half. We tighten both with the screws included in the kit.

13. We put on the decorative trim and the handle body. Don't forget to press the inner tongue with the key.

14. With the door closed, mark the place where the door jamb latch tongue touches, and then hollow out a recess for the latch tongue in the resulting location.

15. Insert a decorative plastic pocket.

16. Screw on the metal plate.

17. The handle is installed.

If you don’t have a drill, then all the holes can be made using a suitable chisel, however, in this case, installing the handle will require more serious repair and construction skills and may turn out to be an overwhelming task for an untrained person.